THE AUDITORY MODELING TOOLBOX
Go to function
EXP_BAUMGARTNER2014 - Figures from Baumgartner et al. (2014)
Program code:
function varargout = exp_baumgartner2014(varargin)
%EXP_BAUMGARTNER2014 Figures from Baumgartner et al. (2014)
% Usage: data = exp_baumgartner2014(flag)
%
% EXP_BAUMGARTNER2014(flag) reproduces figures of the study from
% Baumgartner et al. (2014).
%
% Optional fields of output data structure:
%
% data.contralateralGain
% contralateral gain of binaural weighting function
%
%
% The following flags can be specified;
%
% 'plot' Plot the output of the experiment. This is the default.
%
% 'noplot' Don't plot, only return data.
%
% 'autorefresh' Re-calculate the file if it does not exist. Return 1 if the
% file exist, otherwise 0. This is the default
%
% 'refresh' Always recalculate the file.
%
% 'cached' Always use the cached version. Throws an error if the
% file does not exist.
%
% 'fig2' Reproduce Fig.2:
% Binaural weighting function best fitting results from
% Morimoto (2001) labeled as [1] and Macpherson and Sabin (2007)
% labeled as [2] in a squared error sense.
%
% 'fig3' Reproduce Fig.3:
% Partial and joint prediction residues, e_mathrm{PE} and/or
% e_mathrm{QE}, as functions of the degree of selectivity,
% Gamma, and the motoric response scatter, varepsilon.
% Residuum functions are normalized to the minimum residuum
% obtained for the optimal parameter value. See text for details.
%
% 'fig4' Reproduce Fig.4:
% Actual and predicted response patterns of listeners NH15,
% NH22, and NH72 (from left to right) when listening to targets
% in the baseline condition and in the midsagittal plane.
% Actual response angles are shown as open circles. Probabilistic
% response predictions are encoded by brightness according to
% the color bar to the right. Actual (A) and predicted (P)
% performances (PEs and QEs) of the listener are listed above
% each panel.
%
% 'fig5' Reproduce Fig.5:
% Listener-specific baseline performance in the midsagittal plane.
% Local performance is shown in terms of PE (left), global
% performance in terms of QE (right). Correlation coefficients,
% r, and prediction residues, e, with respect to actual and
% predicted performances are shown above each panel.
%
% 'fig6' Reproduce Fig.6:
% Baseline performance as a function of the magnitudes of the
% lateral response angle. Symbols and whiskers show median values
% and inter-quartile ranges, respectively. Symbols were
% horizontally shifted to avoid overlaps. Correlation coefficients,
% r, and prediction residues, e, specify the correspondence
% between actual (A) and predicted (P) listener-specific performances.
% Predictions of the model without the sensory-motoric mapping (SMM)
% stage are shown with dashed lines.
%
% 'fig7' Reproduce Fig.7:
% Actual and predicted response patterns of listener NH62 when
% listening to broadband (left), low-pass filtered (center),
% or spectrally warped (right) DTFs of the midsagittal plane.
% Data were pooled within pm15^circ of lateral angle.
% All other conventions are as in Fig.4.
%
% 'fig8' Reproduce Fig.8:
% Effect of band limitation and spectral warping.
% Listeners were tested with broadband (BB), low-pass filtered (LP),
% and spectrally warped (W) DTFs. Actual: experimental results
% from Majdak et al. (2013). Part.: Model predictions for the
% actual eight participants based on the actually tested target
% positions. Pool: Model predictions for our pool of 18 listeners
% based on all possible target positions. Dotted horizontal lines
% represent chance rate. All other conventions are as in Fig.6.
%
% 'fig9' Reproduce Fig.9:
% Actual and predicted response patterns of exemplary listener
% NH12 listening to channel-limited HRTFs. Results for an unlimited
% number of channels (broadband click trains), 24, and 9 channels
% are shown from left to right. All other conventions are as in Fig.7.
%
% 'fig10' Reproduce Fig.10:
% Effect of spectral resolution in terms of varying the number
% of spectral channels used by a channel vocoder. Actual experimental
% results are from Goupell et al. (2010). Stimulation with broadband
% click trains (CL) represents an unlimited number of channels.
% All other conventions are as in Fig.8.
%
% 'fig11' Reproduce Fig.11:
% Effect of non-individualized HRTFs, i.e., localizing with others'
% instead of own ears. Statistics summary replotted from Fig.13
% of Middlebrooks (1999b). Horizontal lines represent 25th, 50th,
% and 75th percentiles, the whiskers represent 5th and 95th percentiles,
% and crosses represent minima and maxima. Circles and squares
% represent mean values.
%
% 'fig12' Reproduce Fig.12:
% Effect of spectral ripples. Actual experimental results are
% from Macpherson et al. (2003). Either the ripple depth of 40dB (top)
% or the ripple density of one ripple/octave (bottom) was kept constant.
% Predictions (P) of the model without the DCN stage are shown
% with dashed lines. All other conventions are as in Fig.8.
%
% 'fig13' Reproduce Fig.13:
% Effect of high-frequency attenuation in speech. Actual experimental
% results are from Best et al. (2005). Open and filled symbols
% show actual and predicted results, respectively. Absolute polar
% angle errors (top) and QEs (bottom) averaged across listeners
% are shown.
%
% Requirements:
% 1) SOFA API from http://sourceforge.net/projects/sofacoustics for Matlab (in e.g. thirdparty/SOFA)
%
% 2) Data in hrtf/baumgartner2014
%
% 3) Statistics Toolbox for Matlab (for some of the figures)
%
% Examples:
% ---------
%
% To display Fig.2 use :
%
% exp_baumgartner2014('fig2');
%
% To display Fig.3 use :
%
% exp_baumgartner2014('fig3');
%
% To display Fig.4 use :
%
% exp_baumgartner2014('fig4');
%
% To display Fig.5 use :
%
% exp_baumgartner2014('fig5');
%
% To display Fig.6 use :
%
% exp_baumgartner2014('fig6');
%
% To display Fig.7 use :
%
% exp_baumgartner2014('fig7');
%
% To display Fig.8 use :
%
% exp_baumgartner2014('fig8');
%
% To display Fig.9 use :
%
% exp_baumgartner2014('fig9');
%
% To display Fig.10 use :
%
% exp_baumgartner2014('fig10');
%
% To display Fig.11 use :
%
% exp_baumgartner2014('fig11');
%
% To display Fig.12 use :
%
% exp_baumgartner2014('fig12');
%
% To display Fig.13 use :
%
% exp_baumgartner2014('fig13');
%
% See also: baumgartner2013, data_baumgartner2013
%
% References morimoto2001 macpherson2007
%
% Url: http://amtoolbox.sourceforge.net/amt-0.9.6/doc/experiments/exp_baumgartner2014.php
% Copyright (C) 2009-2014 Peter L. Søndergaard and Piotr Majdak.
% This file is part of AMToolbox version 0.9.5
%
% This program is free software: you can redistribute it and/or modify
% it under the terms of the GNU General Public License as published by
% the Free Software Foundation, either version 3 of the License, or
% (at your option) any later version.
%
% This program is distributed in the hope that it will be useful,
% but WITHOUT ANY WARRANTY; without even the implied warranty of
% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
% GNU General Public License for more details.
%
% You should have received a copy of the GNU General Public License
% along with this program. If not, see <http://www.gnu.org/licenses/>.
% AUTHOR: Robert Baumgartner
%% ------ Check input options --------------------------------------------
definput.import={'amtredofile'};
definput.keyvals.FontSize = 12;
definput.keyvals.MarkerSize = 6;
definput.flags.type = {'missingflag','fig2','fig3','fig4','fig5','fig6',...
'fig7','fig8','fig9','fig10','fig11','fig12','fig13'};
definput.flags.plot = {'plot','noplot'};
[flags,kv] = ltfatarghelper({'FontSize','MarkerSize'},definput,varargin);
if flags.do_missingflag
flagnames=[sprintf('%s, ',definput.flags.type{2:end-2}),...
sprintf('%s or %s',definput.flags.type{end-1},definput.flags.type{end})];
error('%s: You must specify one of the following flags: %s.',upper(mfilename),flagnames);
end;
save_format='-v6';
%% General Plot Settings
TickLength = [0.02,0.04];
%% ------ FIG 2 -----------------------------------------------------------
if flags.do_fig2
% Original Data
Morimoto_left = [1,0.5,0];
Morimoto_right = 1-Morimoto_left;
Morimoto_ang = [60,0,-60];
Macpherson_left = [3.75,0.5,-4]/10+0.5;
Macpherson_right = [-3.75,-0.5,4.75]/10+0.5;
Macpherson_ang = [30,0,-30];
data = [Morimoto_left, -Macpherson_right, Macpherson_left];
lat = [Morimoto_ang , Macpherson_ang , Macpherson_ang];
% Fit Slope
bwslope = 1:0.1:90;
resid = zeros(size(bwslope));
for ii = 1:length(bwslope)
binw_left = 1./(1+exp(-lat/bwslope(ii)));
resid(ii) = rms(binw_left-data);
end
[~,idmin] = min(resid);
contralateralGain = bwslope(idmin);
fprintf('Phi: %2.0f deg\n',contralateralGain)
% Calculate specific weights to plot
lat = -90:5:90;
binw_left = 1./(1+exp(-lat/contralateralGain)); % weight of left ear signal with 0 <= binw <= 1
binw_right = 1-binw_left;
if flags.do_plot
fig = figure;
plot(lat,binw_left)
hold on
plot(lat,binw_right,'r--')
plot(Morimoto_ang,Morimoto_left,'vk','MarkerSize',kv.MarkerSize,'MarkerFaceColor','w');
plot(Macpherson_ang,Macpherson_left,'ok','MarkerSize',kv.MarkerSize,'MarkerFaceColor','w')
plot(Morimoto_ang,Morimoto_left,'vb','MarkerSize',kv.MarkerSize,'MarkerFaceColor','w')
plot(Morimoto_ang,Morimoto_right,'vr','MarkerSize',kv.MarkerSize,'MarkerFaceColor','w')
plot(Macpherson_ang,Macpherson_left,'ob','MarkerSize',kv.MarkerSize,'MarkerFaceColor','w')
plot(Macpherson_ang,Macpherson_right,'or','MarkerSize',kv.MarkerSize,'MarkerFaceColor','w')
l = legend('\itL','\itR','[1]','[2]');
set(l,'Location','East','FontSize',kv.FontSize-1)
set(gca,'XLim',[lat(1) lat(end)],'YLim',[-0.05 1.05],'XTick',-60:30:60,'FontSize',kv.FontSize)
xlabel('\phi_k (deg)','FontSize',kv.FontSize)
ylabel('w_{\zeta}(\phi_k)','FontSize',kv.FontSize)
end
% Output
data.contralateralGain = contralateralGain;
end
%% ------ FIG 3 -----------------------------------------------------------
if flags.do_fig3
fn = [mfilename('fullpath'),'_parametrization.mat'];
if amtredofile(fn,flags.redomode)
autorefreshnotification(fn,flags)
tempfn = fullfile(amtbasepath,'experiments','exp_baumgartner2014_parametrization'); % temporary folder
mkdir(tempfn)
gamma = [1,3,3,3,4,4,4,5,5,5,6,6,6,6,6,6,6,6,6,6,7,7,7,8,8,8,9,9,9,...
10,10,10,12,12,12,16,16,16,30,30,30,100,100,100];
mrs = [0,17,18,19,19,20,21,19,20,21, 0,10,100,17,19,20,21,23,30, 5,...
19,20,21,19,20,21,19,20,21,19,20,21,19,20,21,19,20,21,19,20,21,19,20,21];
for g = 1:length(gamma)
latseg = -60:20:60; % centers of lateral segments
dlat = 10; % lateral range (+-) of each segment
s = data_baumgartner2014('baseline','recalib','gamma',gamma(g),'mrsmsp',mrs(g));
qe_exp = zeros(length(s),length(latseg));
pe_exp = zeros(length(s),length(latseg));
for ll = 1:length(s)
s(ll).target = [];
s(ll).response = [];
s(ll).Nt = [];
for ii = 1:length(latseg)
latresp = s(ll).mm1(:,7);
idlat = latresp <= latseg(ii)+dlat & latresp > latseg(ii)-dlat;
s(ll).mm2 = s(ll).mm1(idlat,:);
s(ll).mm2(:,7) = 0; % set lateral angle to 0deg such that localizationerror works also outside +-30deg
pe_exp(ll,ii) = real(localizationerror(s(ll).mm2,'rmsPmedianlocal'));
qe_exp(ll,ii) = real(localizationerror(s(ll).mm2,'querrMiddlebrooks'));
s(ll).target{ii} = real(s(ll).mm2(:,6)); % polar angle of target
s(ll).response{ii} = real(s(ll).mm2(:,8)); % polar angle of response
s(ll).Nt{ii} = length(s(ll).target{ii});
end
end
%% LocaMo
qe = zeros(length(s),length(latseg));
pe = zeros(length(s),length(latseg));
for ll = 1:length(s)
for ii = 1:length(latseg)
s(ll).sphrtfs{ii} = 0; % init
s(ll).p{ii} = 0; % init
[s(ll).sphrtfs{ii},polang] = extractsp( latseg(ii),s(ll).Obj );
[s(ll).p{ii},respangs] = baumgartner2014(...
s(ll).sphrtfs{ii},s(ll).sphrtfs{ii},s(ll).fs,...
'S',s(ll).S,'lat',latseg(ii),'polsamp',polang,...
'gamma',gamma(g),'mrsmsp',mrs(g));
if s(ll).Nt{ii} > 0
[ qe(ll,ii),pe(ll,ii) ] = pmv2ppp( ...
s(ll).p{ii} , polang , respangs , s(ll).target{ii});
else
qe(ll,ii) = NaN;
pe(ll,ii) = NaN;
end
end
end
s = rmfield(s,{'Obj','mm1','mm2','sphrtfs'}); % reduce file size
savename = ['result_baseline_g' num2str(gamma(g),'%u') '_mrs' num2str(mrs(g),'%u')];
save(fullfile(tempfn,savename),'s', 'qe', 'pe', 'qe_exp', 'pe_exp', 'latseg')
end
%% Combine results to single mat file
fname = dir(fullfile(tempfn,'result_baseline_g*.mat'));
perr = zeros(18,7,length(fn));
qerr = perr;
for ii = 1:length(fname)
tmp = load(fullfile(tempfn,fname(ii).name));
perr(:,:,ii) = tmp.pe;
qerr(:,:,ii) = tmp.qe;
if ii == 1
perr_exp = tmp.pe_exp;
qerr_exp = tmp.qe_exp;
end
gKey = '_g';
gIndex = strfind(fname(ii).name,gKey);
g(ii) = sscanf(fname(ii).name(gIndex(1) + length(gKey):end), '%g', 1);
mrsKey = '_mrs';
mrsIndex = strfind(fname(ii).name,mrsKey);
mrs(ii) = sscanf(fname(ii).name(mrsIndex(1) + length(mrsKey):end), '%g', 1);
end
% Sort data acc. to ascending gamma
[g,ig] = sort(g);
mrs = mrs(ig);
perr = perr(:,:,ig);
qerr = qerr(:,:,ig);
% Number of targets for each listeners (1st dim) and lateral segment (2nd
% dim)
Ntargets = zeros(18,7);
for jj = 1:18
Ntargets(jj,:) = [tmp.s(jj).Nt{:}];
end
save(fn,'perr','perr_exp','qerr','qerr_exp','g','mrs','Ntargets',save_format);
rmdir(tempfn,'s')
delete(fullfile(amtbasepath,'modelstages','baumgartner2014calibration.mat'))
else
load(fn);
end
varargout{1} = load(fn);
[qerr0,perr0] = pmv2ppp(ones(49,44)); % chance performances
% extract all different gammas
gamma = g(1);
for ii =2:length(g)
if g(ii) > gamma(end)
gamma = [gamma;g(ii)];
end
end
Nlat = size(perr,2);
Nset = size(perr,3);
idnum = Ntargets ~= 0;
relNt = Ntargets/sum(Ntargets(:));
% Compute all residues
resid.perr = zeros(length(g),1);
resid.qerr = resid.perr;
for ii = 1:Nset
dperr = perr_exp - perr(:,:,ii);
dqerr = qerr_exp - qerr(:,:,ii);
resid.perr(ii) = sqrt( relNt(idnum)' * (dperr(idnum)).^2 );
resid.qerr(ii) = sqrt( relNt(idnum)' * (dqerr(idnum)).^2 );
end
resid.total = resid.perr/perr0 + resid.qerr/qerr0;
% Select optimal residues for various gamma
id_g = zeros(length(gamma),1);
etotal_g = zeros(length(gamma),1);
for ii = 1:length(gamma)
idgamma = find(g == gamma(ii));
[etotal_g(ii),id] = min(resid.total(idgamma));
id_g(ii) = idgamma(id);
end
eperr_g = resid.perr(id_g);
eqerr_g = resid.qerr(id_g);
[tmp,idopt] = min(etotal_g);
etotal_g = etotal_g / etotal_g(idopt);
eperr_g = eperr_g / eperr_g(idopt);
eqerr_g = eqerr_g / eqerr_g(idopt);
% Select residues for optimal gamma and various mrs
idgammaopt = find(g == gamma(idopt));
mrs_gopt = mrs(idgammaopt);
[mrssort,idsort] = sort(mrs_gopt);
idmrs = idgammaopt(idsort);
[tmp,idopt_mrs] = min(resid.total(idmrs));
idnorm = idmrs(idopt_mrs);
etotal_gopt = resid.total(idmrs) / resid.total(idnorm);
eperr_gopt = resid.perr(idmrs) / resid.perr(idnorm);
eqerr_gopt = resid.qerr(idmrs) / resid.qerr(idnorm);
if flags.do_plot
%% Plot residues for various gamma
% Interpolate data
gamma_int = logspace(0,2.1,1000);
inttype = 'cubic';
dperr_int = interp1(log10(gamma),eperr_g,log10(gamma_int),inttype);
dqerr_int = interp1(log10(gamma),eqerr_g,log10(gamma_int),inttype);
dtot_int = interp1(log10(gamma),etotal_g,log10(gamma_int),inttype);
% Plot
fig=figure;
subplot(1,2,1)
semilogx(gamma_int,dperr_int,'k: ')
hold on
semilogx(gamma_int,dqerr_int,'k--')
semilogx(gamma_int,dtot_int,'k-')
semilogx(gamma(idopt),0.95,'vk','MarkerFaceColor','k','MarkerSize',kv.MarkerSize+1)
leg = legend('PE','QE','PE&QE','\{\epsilon,\Gamma\}_{opt}');
set(leg,'Location','northeast','FontSize',kv.FontSize-1)
ylabel('e(\Gamma) / e(\Gamma_{opt})','FontSize',kv.FontSize)
xlabel('\Gamma (dB^{-1})','FontSize',kv.FontSize)
set(gca,'XLim',[gamma(1)-0.1 gamma(end)+20],'YLim',[0.91 1.7],'XMinorTick','on',...
'FontSize',kv.FontSize-1)
set(gca,'XTick',[1:10,20:10:100],'XTickLabel',{1,2,3,'',5,'','','','',10,20,30,'',50,'','','','',100})
set(gca,'TickLength',TickLength)
%% Plot residues for optimal gamma and various mrs
% Interpolation
mrs_int = 0:0.1:45;
inttype = 'cubic';
dperr_int = interp1(mrssort,eperr_gopt,mrs_int,inttype);
dqerr_int = interp1(mrssort,eqerr_gopt,mrs_int,inttype);
dtot_int = interp1(mrssort,etotal_gopt,mrs_int,inttype);
% Plot
subplot(1,2,2)
plot(mrs_int,dperr_int,'k:')
hold on
plot(mrs_int,dqerr_int,'k--')
plot(mrs_int,dtot_int,'k-')
plot(mrs(idopt_mrs),0.95,'vk','MarkerFaceColor','k','MarkerSize',kv.MarkerSize+1)
ylabel('e(\epsilon) / e(\epsilon_{opt})','FontSize',kv.FontSize)
xlabel('\epsilon (deg)','FontSize',kv.FontSize)
set(gca,'XLim',[mrssort(1) 40],'YLim',[0.91 1.7],'XMinorTick','on',...
'FontSize',kv.FontSize-1)
set(gca,'TickLength',TickLength)
end
end
%% ------ FIG 4 -----------------------------------------------------------
if flags.do_fig4
latseg = [-20,0,20]; ii = 2; % centers of lateral segments
% dlat = 10; % lateral range (+-) of each segment
s = data_baumgartner2014('baseline');
idselect = ismember({s.id},{'NH15','NH22','NH72'});
s = s(idselect);
%% LocaMo
qe = zeros(length(s),length(latseg));
pe = zeros(length(s),length(latseg));
for ll = 1:length(s)
s(ll).sphrtfs{ii} = 0; % init
s(ll).p{ii} = 0; % init
[s(ll).sphrtfs{ii},polang] = extractsp( latseg(ii),s(ll).Obj );
[s(ll).p{ii},respangs] = baumgartner2014(...
s(ll).sphrtfs{ii},s(ll).sphrtfs{ii},s(ll).fs,...
'S',s(ll).S,'lat',latseg(ii),'polsamp',polang);
[ qe(ll,ii),pe(ll,ii) ] = pmv2ppp( ...
s(ll).p{ii} , polang , respangs , s(ll).target{ii});
if flags.do_plot
if ll ==1; figure; end
subplot(1,3,ll)
Nmax = min(150,s(ll).Ntargets{ii});
idplot = round(1:s(ll).Ntargets{ii}/Nmax:s(ll).Ntargets{ii});
plotbaumgartner2013(s(ll).p{ii},polang,respangs,...
s(ll).target{ii}(idplot),s(ll).response{ii}(idplot),...
'MarkerSize',kv.MarkerSize,'cmax',0.05,'nocolorbar');
title({['A: PE = ' num2str(s(ll).pe_exp_lat(ii),2) '\circ, QE = ' num2str(s(ll).qe_exp_lat(ii),2) '%'];['P: PE = ' num2str(pe(ll,ii),2) '\circ, QE = ' num2str(qe(ll,ii),2) '%']},...
'FontSize',kv.FontSize-1)
text(90,240,s(ll).id,'FontSize',kv.FontSize,...
'Color','w','HorizontalAlignment','center')
xlabel('Target Angle (deg)','FontSize',kv.FontSize)
ylabel('Response Angle (deg)','FontSize',kv.FontSize)
set(gca,'FontSize',kv.FontSize-1)
set(gca,'XTickLabel',{[];[];0;[];60;[];120;[];180;[];[]})
set(gca,'YTickLabel',{-60;[];0;[];60;[];120;[];180;[];240})
end
end
s = rmfield(s,{'Obj','mm1','sphrtfs'}); % reduce file size
varargout{1} = s;
end
%% ------ FIG 5 -----------------------------------------------------------
if flags.do_fig5
fn = [mfilename('fullpath'),'_baseline.mat'];
if amtredofile(fn,flags.redomode)
autorefreshnotification(fn,flags)
latseg = -60:20:60; % centers of lateral segments
dlat = 10; % lateral range (+-) of each segment
s = data_baumgartner2014('baseline');
qe_exp = zeros(length(s),length(latseg));
pe_exp = zeros(length(s),length(latseg));
for ll = 1:length(s)
s(ll).target = [];
s(ll).response = [];
s(ll).Nt = [];
for ii = 1:length(latseg)
latresp = s(ll).mm1(:,7);
idlat = latresp <= latseg(ii)+dlat & latresp > latseg(ii)-dlat;
s(ll).mm2 = s(ll).mm1(idlat,:);
s(ll).mm2(:,7) = 0; % set lateral angle to 0deg such that localizationerror works outside +-30deg
pe_exp(ll,ii) = real(localizationerror(s(ll).mm2,'rmsPmedianlocal'));
qe_exp(ll,ii) = real(localizationerror(s(ll).mm2,'querrMiddlebrooks'));
s(ll).target{ii} = real(s(ll).mm2(:,6)); % polar angle of target
s(ll).response{ii} = real(s(ll).mm2(:,8)); % polar angle of response
s(ll).Nt{ii} = length(s(ll).target{ii});
end
end
%% LocaMo
qe = zeros(length(s),length(latseg));
pe = zeros(length(s),length(latseg));
for ll = 1:length(s)
for ii = 1:length(latseg)
s(ll).sphrtfs{ii} = 0; % init
s(ll).p{ii} = 0; % init
[s(ll).sphrtfs{ii},polang] = extractsp( latseg(ii),s(ll).Obj );
[s(ll).p{ii},respangs] = baumgartner2014(...
s(ll).sphrtfs{ii},s(ll).sphrtfs{ii},s(ll).fs,...
'S',s(ll).S,'lat',latseg(ii),'polsamp',polang);
if s(ll).Nt{ii} > 0
[ qe(ll,ii),pe(ll,ii) ] = pmv2ppp( ...
s(ll).p{ii} , polang , respangs , s(ll).target{ii});
else
qe(ll,ii) = NaN;
pe(ll,ii) = NaN;
end
end
end
s = rmfield(s,{'Obj','mm1','mm2','sphrtfs'}); % reduce file size
save(fn,'s', 'qe', 'pe', 'qe_exp', 'pe_exp', 'latseg',save_format);
end
load(fn);
varargout{1} = load(fn);
sign = {'ko';'kd';'kd';'k<';'kp';'k>'};
flags.do_pm30deglat = true; % consider lateral range of +-30 deg
Ns = length(s);
relfreq = zeros(Ns,length(latseg));
for jj = 1:Ns
Ntlat = [s(jj).Nt{:}];
Ntall(jj) = sum(Ntlat);
relfreq(jj,:) = Ntlat/Ntall(jj);
end
if flags.do_pm30deglat
idlat = find(latseg <= 30 & latseg >= -30);
else % consider only median plane (+-10 deg)
idlat = latseg == 0;
end
relfreqPerSubject = relfreq(:,idlat)./repmat(sum(relfreq(:,idlat),2),1,3);
pe = sum(relfreqPerSubject .* pe(:,idlat) , 2);
qe = sum(relfreqPerSubject .* qe(:,idlat) , 2);
% Actual performances sorted acc. to deteriorating performance
pe_exp = [s.pe_exp]';
qe_exp = [s.qe_exp]';
[tmp,idsort] = sort(pe_exp+qe_exp);
% IDs for xlabel
for ll = 1:Ns
NHs(ll,:) = s(ll).id;
end
% Mean RMS Differences
idnum = not(isnan(pe_exp(idsort)) | isnan(pe(idsort)));
idsort = idsort(idnum);
relfreqAcrossSubjects = sum(relfreq(:,idlat),2);
relfreqAcrossSubjects = relfreqAcrossSubjects/sum(relfreqAcrossSubjects);
dpe = sqrt( relfreqAcrossSubjects(idsort)' * (pe_exp(idsort) - pe(idsort)).^2 );
dqe = sqrt( relfreqAcrossSubjects(idsort)' * (qe_exp(idsort) - qe(idsort)).^2 );
% Correlation Coefficients
idnum = not(isnan(pe_exp(:)) | isnan(pe));
r = corrcoef(pe_exp(idnum),pe(idnum));
r_pe = r(2);
idnum = not(isnan(qe_exp(:)) | isnan(qe));
[r,p] = corrcoef(qe_exp(idnum),qe(idnum));
r_qe = r(2);
if flags.do_plot
fig=figure;
%% Polar Error
subplot(1,2,1)
ylim = [23.1 40.9];
ii = 1;
h = bar(pe_exp(idsort));
hold on
plot(pe(idsort),sign{ii},'MarkerSize',kv.MarkerSize,'MarkerFaceColor','k')
set(gca,'XLim',[0 Ns+1],'XTick',1:Ns,'XTickLabel',NHs(idsort,3:4),...
'YLim',ylim,'YMinorTick','on','FontSize',kv.FontSize-2)
plot([0,Ns+1],[ylim(1),ylim(1)]+0.0015*diff(ylim),'k') % bottom line
set(h,'FaceColor','white')
xlabel('Listener (NH)','FontSize',kv.FontSize)
ylabel('Local Polar RMS Error (deg)','FontSize',kv.FontSize)
l = legend('Actual','Predicted');
set(l,'FontSize',kv.FontSize-2,'Location','northwest')
title(['e_{PE} = ' num2str(dpe,'%0.1f') '\circ ; r_{PE} = ' num2str(r_pe,'%0.2f')],...
'FontSize',kv.FontSize)
%% Quadrant Error
subplot(1,2,2)
ylim = [0.1 19.9];
h = bar(qe_exp(idsort));
hold on
plot(qe(idsort),sign{ii},'MarkerSize',kv.MarkerSize,'MarkerFaceColor','k')
set(gca,'XLim',[0 Ns+1],'XTick',1:Ns,'XTickLabel',NHs(idsort,3:4),...
'YLim',ylim,'YMinorTick','on','FontSize',kv.FontSize-2)
plot([0,Ns+1],[ylim(1),ylim(1)]+0.0015*diff(ylim),'k') % bottom line
set(h,'FaceColor','white')
xlabel('Listener (NH)','FontSize',kv.FontSize)
ylabel('Quadrant Error (%)','FontSize',kv.FontSize)
title(['e_{QE} = ' num2str(dqe,'%0.1f') '% ; r_{QE} = ' num2str(r_qe,'%0.2f')],...
'FontSize',kv.FontSize)
set(fig,'PaperPosition',[1,1,9,3.5])
end
end
%% ------ FIG 6 -----------------------------------------------------------
if flags.do_fig6
fn = [mfilename('fullpath'),'_baseline.mat'];
if amtredofile(fn,flags.redomode)
autorefreshnotification(fn,flags)
if flags.do_refresh
exp_baumgartner2014('fig5','refresh');
else
exp_baumgartner2014('fig5');
end
else
varargout{1} = load(fn);
load(fn);
end
paradata = load([mfilename('fullpath'),'_parametrization.mat']);
idmrs0 = paradata.g == 6 & paradata.mrs == 0;
mrs0.pe = paradata.perr(:,:,idmrs0);
mrs0.qe = paradata.qerr(:,:,idmrs0);
%% # of targets
Ns = length(s);
Nlat = length(latseg);
Ntlat = zeros(Ns,Nlat);
relfreq = zeros(Ns,Nlat);
Ntall = zeros(Ns,1);
for jj = 1:Ns
Ntlat(jj,:) = [s(jj).Nt{:}];
Ntall(jj) = sum(Ntlat(jj,:));
relfreq(jj,:) = Ntlat(jj,:)/Ntall(jj);
end
relfreq = relfreq.*repmat(Ntall,1,Nlat)/sum(Ntall);
%% Pooling to lateralization
idlat0 = round(Nlat/2);
idleft = idlat0-1:-1:1;
idright = idlat0+1:Nlat;
latseg = latseg(idlat0:end);
relfreqLR = Ntlat(:,idleft) ./ (Ntlat(:,idleft) + Ntlat(:,idright) + eps);
pe = [pe(:,idlat0) , relfreqLR.*pe(:,idleft) + (1-relfreqLR).*pe(:,idright)];
pe_exp = [pe_exp(:,idlat0) , relfreqLR.*pe_exp(:,idleft) + (1-relfreqLR).*pe_exp(:,idright)];
qe = [qe(:,idlat0) , relfreqLR.*qe(:,idleft) + (1-relfreqLR).*qe(:,idright)];
qe_exp = [qe_exp(:,idlat0) , relfreqLR.*qe_exp(:,idleft) + (1-relfreqLR).*qe_exp(:,idright)];
relfreq = [relfreq(:,idlat0) , relfreq(:,1:idlat0-1) + relfreq(:,Nlat:-1:idlat0+1)];
mrs0.pe = [mrs0.pe(:,idlat0) , relfreqLR.*mrs0.pe(:,idleft) + (1-relfreqLR).*mrs0.pe(:,idright)];
mrs0.qe = [mrs0.qe(:,idlat0) , relfreqLR.*mrs0.qe(:,idleft) + (1-relfreqLR).*mrs0.qe(:,idright)];
%% Evaluation Metrics
idnum = not(isnan(pe_exp) | isnan(pe));
dpe = sqrt( relfreq(idnum)' * (pe_exp(idnum) - pe(idnum)).^2 );
dqe = sqrt( relfreq(idnum)' * (qe_exp(idnum) - qe(idnum)).^2 );
[r_pe,p_pe] = corrcoef(pe_exp(idnum),pe(idnum));
[r_qe,p_qe] = corrcoef(qe_exp(idnum),qe(idnum));
mrs0.dpe = sqrt( relfreq(idnum)' * (pe_exp(idnum) - mrs0.pe(idnum)).^2 );
mrs0.dqe = sqrt( relfreq(idnum)' * (qe_exp(idnum) - mrs0.qe(idnum)).^2 );
[mrs0.r_pe,mrs0.p_pe] = corrcoef(pe_exp(idnum),mrs0.pe(idnum));
[mrs0.r_qe,mrs0.p_qe] = corrcoef(qe_exp(idnum),mrs0.qe(idnum));
%% Quartiles
quart_pe = zeros(3,length(latseg),2); % 1st dim: 25/50/75 quantiles; 2nd dim: lat; 3rd dim: model/experiment/mrs0
quart_qe = zeros(3,length(latseg),2);
qlow = 0.25;
qhigh = 0.75;
for ii = 1:length(latseg)
id = not(isnan(pe(:,ii)));
quart_pe(:,ii,1) = quantile(pe(id,ii),[qlow .50 qhigh]);
quart_pe(:,ii,3) = quantile(mrs0.pe(id,ii),[qlow .50 qhigh]);
id = not(isnan(pe_exp(:,ii)));
quart_pe(:,ii,2) = quantile(pe_exp(id,ii),[qlow .50 qhigh]);
id = not(isnan(qe(:,ii)));
quart_qe(:,ii,1) = quantile(qe(id,ii),[qlow .50 qhigh]);
quart_qe(:,ii,3) = quantile(mrs0.qe(id,ii),[qlow .50 qhigh]);
id = not(isnan(qe_exp(:,ii)));
quart_qe(:,ii,2) = quantile(qe_exp(id,ii),[qlow .50 qhigh]);
end
if flags.do_plot
dx = 3;
%% PE
fig = figure;
subplot(1,2,1)
errorbar(latseg-dx,quart_pe(2,:,1),...
quart_pe(2,:,1)-quart_pe(1,:,1),...
quart_pe(3,:,1)-quart_pe(2,:,1),...
'ok-','MarkerSize',kv.MarkerSize,'MarkerFaceColor','k');
hold on
errorbar(latseg+dx,quart_pe(2,:,3),...
quart_pe(2,:,3)-quart_pe(1,:,3),...
quart_pe(3,:,3)-quart_pe(2,:,3),...
'dk--','MarkerSize',kv.MarkerSize-1,'MarkerFaceColor','k');
errorbar(latseg,quart_pe(2,:,2),...
quart_pe(2,:,2)-quart_pe(1,:,2),...
quart_pe(3,:,2)-quart_pe(2,:,2),...
'ok-','MarkerSize',kv.MarkerSize,'MarkerFaceColor','w');
title(['e_{PE} = ' num2str(dpe,'%0.1f') '\circ ; r_{PE} = ' num2str(r_pe(2),'%0.2f')],...
'FontSize',kv.FontSize)
set(gca,'XLim',[min(latseg)-2*dx,max(latseg)+2*dx],'YLim',[21.1,45.9],...
'YMinorTick','on','FontSize',kv.FontSize)
ylabel('Local Polar RMS Error (deg)','FontSize',kv.FontSize)
xlabel('Magnitude of Lateral Angle (deg)','FontSize',kv.FontSize)
%% QE
subplot(1,2,2)
errorbar(latseg-dx,quart_qe(2,:,1),...
quart_qe(2,:,1)-quart_qe(1,:,1),...
quart_qe(3,:,1)-quart_qe(2,:,1),...
'ok-','MarkerSize',kv.MarkerSize,'MarkerFaceColor','k');
hold on
errorbar(latseg+dx,quart_qe(2,:,3),...
quart_qe(2,:,3)-quart_qe(1,:,3),...
quart_qe(3,:,3)-quart_qe(2,:,3),...
'dk--','MarkerSize',kv.MarkerSize-1,'MarkerFaceColor','k');
errorbar(latseg,quart_qe(2,:,2),...
quart_qe(2,:,2)-quart_qe(1,:,2),...
quart_qe(3,:,2)-quart_qe(2,:,2),...
'ok-','MarkerSize',kv.MarkerSize,'MarkerFaceColor','w');
title(['e_{QE} = ' num2str(dqe,'%0.1f') '% ; r_{QE} = ' num2str(r_qe(2),'%0.2f')],...
'FontSize',kv.FontSize)
set(gca,'XLim',[min(latseg)-2*dx,max(latseg)+2*dx],'YLim',[2.1,26.9],...
'XTick',latseg,'YMinorTick','on','FontSize',kv.FontSize)
ylabel('Quadrant Error (%)','FontSize',kv.FontSize)
xlabel('Magnitude of Lateral Angle (deg)','FontSize',kv.FontSize)
l = legend('P (with SMM)','P (w/o SMM)','A');
set(l,'FontSize',kv.FontSize-1,'Location','northwest')
set(fig,'PaperPosition',[1,1,10,3.5])
end
end
%% ------ FIG 7 -----------------------------------------------------------
if flags.do_fig7
latdivision = 0; % lateral angle
dlat = 15;
% Experimental Settings
Conditions = {'BB','LP','W'};
%% Computations
s = data_baumgartner2014('pool');
s = s(ismember({s.id},'NH39'));
disp(['Listener: ' s.id])
chance = [];
for C = 1:length(Conditions)
Cond = Conditions{C};
%% Data
% Experimental data
data = data_majdak2013(Cond);
for ll = 1:length(s)
if sum(ismember({data.id},s(ll).id)) % participant ?
s(ll).mm1=data(ismember({data.id},s(ll).id)).mtx;
for ii = 1:length(latdivision)
latresp = s(ll).mm1(:,7);
idlat = latresp <= latdivision(ii)+dlat & latresp > latdivision(ii)-dlat;
mm2 = s(ll).mm1(idlat,:);
chance = [chance;mm2];
s(ll).target{ii} = mm2(:,6); % polar angle of target
s(ll).response{ii} = mm2(:,8); % polar angle of response
end
end
end
for ll = 1:length(s)
for ii = 1:length(latdivision)
s(ll).spdtfs{ii} = 0; % init
s(ll).polang{ii} = 0; % init
[s(ll).spdtfs{ii},s(ll).polang{ii}] = extractsp(...
latdivision(ii),s(ll).Obj);
if C == 1 % Learn
s(ll).spdtfs_c{ii} = s(ll).spdtfs{ii};
elseif C == 2 % Dummy
fn_filters = 'exp_baumgartner2014_spatstrat_lpfilter.mat';
if not(exist(fn_filters,'file'))
disp(['Downloading ' fn_filters ' from http://www.kfs.oeaw.ac.at/']);
targetfn = fullfile(amtbasepath,'humandata',fn_filters);
sourcefn = ['http://www.kfs.oeaw.ac.at/research/experimental_audiology/projects/amt/' fn_filters];
urlwrite(sourcefn,targetfn);
end
temp=load(fn_filters);
s(ll).spdtfs_c{ii} = filter(temp.blp,temp.alp,s(ll).spdtfs{ii});
elseif C == 3 % Warped
s(ll).spdtfs_c{ii} = warp_hrtf(s(ll).spdtfs{ii},s(ll).fs);
end
end
end
%% Run Model
for ll = 1:length(s)
qe = zeros(1,length(latdivision));
pe = zeros(1,length(latdivision));
qe_t = zeros(1,length(latdivision));
pe_t = zeros(1,length(latdivision));
for ii = 1:length(latdivision)
[s(ll).p{ii},rang] = baumgartner2014(...
s(ll).spdtfs_c{ii},s(ll).spdtfs{ii},s(ll).fs,...
'S',s(ll).S,'lat',latdivision(ii),...
'polsamp',s(ll).polang{ii});
[ qe(ii),pe(ii) ] = pmv2ppp(s(ll).p{ii} , s(ll).polang{ii} , rang);
if sum(ismember({data.id},s(ll).id)) % if participant then actual targets
[ qe_t(ii),pe_t(ii) ] = pmv2ppp( ...
s(ll).p{ii} , s(ll).polang{ii} , rang , s(ll).target{ii} );
end
end
% Model results of pool
s(ll).qe_pool(C,1) = mean(qe);
s(ll).pe_pool(C,1) = mean(pe);
if sum(ismember({data.id},s(ll).id)) % participant ?
% Actual experimental results
s(ll).qe_exp(C,1) = localizationerror(s(ll).mm1,'querrMiddlebrooks');
s(ll).pe_exp(C,1) = localizationerror(s(ll).mm1,'rmsPmedianlocal');
s(ll).Nt(C,1) = size(s(ll).mm1,1);
% Model results of participants (actual target angles)
if length(latdivision) == 3
s(ll).qe_part(C,1) = (qe_t(1)*length(s(ll).target{1}) + ...
qe_t(2)*length(s(ll).target{2}) + ...
qe_t(3)*length(s(ll).target{3}))/...
(length(s(ll).target{1})+length(s(ll).target{2})+length(s(ll).target{3}));
s(ll).pe_part(C,1) = (pe_t(1)*length(s(ll).target{1}) + ...
pe_t(2)*length(s(ll).target{2}) + ...
pe_t(3)*length(s(ll).target{3}))/...
(length(s(ll).target{1})+length(s(ll).target{2})+length(s(ll).target{3}));
else
s(ll).qe_part(C,1) = mean(qe_t);
s(ll).pe_part(C,1) = mean(pe_t);
end
if flags.do_plot
if C == 1; figure; end
subplot(1,3,C)
ii = find(latdivision==0);
responses = [];
targets = [];
for jj = ii
responses = [responses;s(ll).response{jj}];
targets = [targets;s(ll).target{jj}];
end
plotbaumgartner2013(s(ll).p{ii},s(ll).polang{ii},rang,...
targets,responses,'MarkerSize',kv.MarkerSize,'cmax',0.05,'nocolorbar')
text(90,240,Cond,...
'FontSize',kv.FontSize,'Color','w','HorizontalAlignment','center')
Nt = length(targets);
tmp.m = [zeros(Nt,5) targets(:) zeros(Nt,1) responses(:)];
tmp.qe = localizationerror(tmp.m,'querrMiddlebrooks');
tmp.pe = localizationerror(tmp.m,'rmsPmedianlocal');
title({['A: PE = ' num2str(tmp.pe,2) '\circ, QE = ' num2str(tmp.qe,2) '%'];...
['P: PE = ' num2str(pe_t(ii),2) '\circ, QE = ' num2str(qe_t(ii),2) '%']},'FontSize',kv.FontSize-1)
xlabel('Target Angle (deg)','FontSize',kv.FontSize)
ylabel('Response Angle (deg)','FontSize',kv.FontSize)
set(gca,'FontSize',kv.FontSize-1)
set(gca,'XTickLabel',{[];[];0;[];60;[];120;[];180;[];[]})
set(gca,'YTickLabel',{-60;[];0;[];60;[];120;[];180;[];240})
end
end
end
end
varargout{1} = s;
end
%% ------ FIG 8 -----------------------------------------------------------
if flags.do_fig8
fn = [mfilename('fullpath'),'_spatstrat.mat'];
if amtredofile(fn,flags.redomode)
autorefreshnotification(fn,flags)
latdivision = [-20,0,20]; % lateral angle
dlat = 10;
% Experimental Settings
Conditions = {'BB','LP','W'};
%% Computations
s = data_baumgartner2014('pool');
chance = [];
for C = 1:length(Conditions)
Cond = Conditions{C};
%% Data
% Experimental data
data = data_majdak2013(Cond);
for ll = 1:length(s)
if sum(ismember({data.id},s(ll).id)) % if actual participant
s(ll).mm1=data(ismember({data.id},s(ll).id)).mtx;
for ii = 1:length(latdivision)
latresp = s(ll).mm1(:,7);
idlat = latresp <= latdivision(ii)+dlat & latresp > latdivision(ii)-dlat;
mm2 = s(ll).mm1(idlat,:);
chance = [chance;mm2];
s(ll).target{ii} = mm2(:,6); % polar angle of target
s(ll).response{ii} = mm2(:,8); % polar angle of response
end
end
end
for ll = 1:length(s)
for ii = 1:length(latdivision)
s(ll).spdtfs{ii} = 0; % init
s(ll).polang{ii} = 0; % init
[s(ll).spdtfs{ii},s(ll).polang{ii}] = extractsp(...
latdivision(ii),s(ll).Obj);
if C == 1 % Learn
s(ll).spdtfs_c{ii} = s(ll).spdtfs{ii};
elseif C == 2 % Dummy
fn_filters = 'exp_baumgartner2014_spatstrat_lpfilter.mat';
if not(exist(fn_filters,'file'))
disp(['Downloading ' fn_filters ' from http://www.kfs.oeaw.ac.at/']);
targetfn = fullfile(amtbasepath,'humandata',fn_filters);
sourcefn = ['http://www.kfs.oeaw.ac.at/research/experimental_audiology/projects/amt/' fn_filters];
urlwrite(sourcefn,targetfn);
end
temp=load(fn_filters);
s(ll).spdtfs_c{ii} = filter(temp.blp,temp.alp,s(ll).spdtfs{ii});
elseif C == 3 % Warped
s(ll).spdtfs_c{ii} = warp_hrtf(s(ll).spdtfs{ii},s(ll).fs);
end
end
end
%% Run Model
for ll = 1:length(s)
qe = zeros(1,length(latdivision));
pe = zeros(1,length(latdivision));
qe_t = zeros(1,length(latdivision));
pe_t = zeros(1,length(latdivision));
for ii = 1:length(latdivision)
[s(ll).p{ii},rang] = baumgartner2014(...
s(ll).spdtfs_c{ii},s(ll).spdtfs{ii},s(ll).fs,...
'S',s(ll).S,'lat',latdivision(ii),...
'polsamp',s(ll).polang{ii});
[ qe(ii),pe(ii) ] = pmv2ppp(s(ll).p{ii} , s(ll).polang{ii} , rang);
if sum(ismember({data.id},s(ll).id)) % if actual participant actual targets
[ qe_t(ii),pe_t(ii) ] = pmv2ppp( ...
s(ll).p{ii} , s(ll).polang{ii} , rang , s(ll).target{ii} );
end
end
% Model results of pool
wlat = cos(deg2rad(latdivision)); % weighting compensating lateral compression
wlat = wlat/sum(wlat);
s(ll).qe_pool(C,1) = wlat * qe(:);
s(ll).pe_pool(C,1) = wlat * pe(:);
if sum(ismember({data.id},s(ll).id)) % if actual participant
% Actual experimental results
s(ll).qe_exp(C,1) = localizationerror(s(ll).mm1,'querrMiddlebrooks');
s(ll).pe_exp(C,1) = localizationerror(s(ll).mm1,'rmsPmedianlocal');
s(ll).Nt(C,1) = size(s(ll).mm1,1);
% Model results of participants (actual target angles)
if length(latdivision) == 3
s(ll).qe_part(C,1) = (qe_t(1)*length(s(ll).target{1}) + ...
qe_t(2)*length(s(ll).target{2}) + ...
qe_t(3)*length(s(ll).target{3}))/...
(length(s(ll).target{1})+length(s(ll).target{2})+length(s(ll).target{3}));
s(ll).pe_part(C,1) = (pe_t(1)*length(s(ll).target{1}) + ...
pe_t(2)*length(s(ll).target{2}) + ...
pe_t(3)*length(s(ll).target{3}))/...
(length(s(ll).target{1})+length(s(ll).target{2})+length(s(ll).target{3}));
else
s(ll).qe_part(C,1) = mean(qe_t);
s(ll).pe_part(C,1) = mean(pe_t);
end
end
end
end
s = rmfield(s,{'Obj','spdtfs_c','spdtfs'});% reduce file size
%% Compute Chance Performance
chance = repmat(chance,10,1);
id_chance = randi(size(chance,1),size(chance,1),1);
chance(:,8) = chance(id_chance,6);
pe_chance = localizationerror(chance,'rmsPmedianlocal');
qe_chance = localizationerror(chance,'querrMiddlebrooks');
[r,p] = corrcoef([s.qe_exp],[s.qe_part]);
cc.qe.r = r(2);
cc.qe.p = p(2);
fprintf('QE: r = %0.2f, p = %0.3f\n',r(2),p(2));
[r,p] = corrcoef([s.pe_exp],[s.pe_part]);
cc.pe.r = r(2);
cc.pe.p = p(2);
fprintf('PE: r = %0.2f, p = %0.3f\n',r(2),p(2));
save(fn,'cc', 's', 'pe_chance', 'qe_chance',save_format);
else
load(fn);
end
varargout{1} = load(fn);
%% Measures
% Quartiles
quart_pe_part = quantile([s.pe_part]',[.25 .50 .75]);
quart_qe_part = quantile([s.qe_part]',[.25 .50 .75]);
quart_pe_pool = quantile([s.pe_pool]',[.25 .50 .75]);
quart_qe_pool = quantile([s.qe_pool]',[.25 .50 .75]);
quart_pe_exp = quantile([s.pe_exp]',[.25 .50 .75]);
quart_qe_exp = quantile([s.qe_exp]',[.25 .50 .75]);
% RMS Differences
% individual:
Ntargets = [s.Nt]'; % # of targets
relfreq = Ntargets/sum(Ntargets(:));
sd_pe = ([s.pe_part]'-[s.pe_exp]').^2; % squared differences
dpe = sqrt(relfreq(:)' * sd_pe(:)); % weighted RMS diff.
sd_qe = ([s.qe_part]'-[s.qe_exp]').^2;
dqe = sqrt(relfreq(:)' * sd_qe(:));
% Chance performance
qe0 = qe_chance;
pe0 = pe_chance;
if flags.do_plot
dx = 0.1;
figure
subplot(121)
errorbar((1:3)+dx,quart_pe_part(2,:),...
quart_pe_part(2,:) - quart_pe_part(1,:),...
quart_pe_part(3,:) - quart_pe_part(2,:),...
'ko-','MarkerSize',kv.MarkerSize,...
'MarkerFaceColor','k');
hold on
errorbar((1:3)-dx,quart_pe_pool(2,:),...
quart_pe_pool(2,:) - quart_pe_pool(1,:),...
quart_pe_pool(3,:) - quart_pe_pool(2,:),...
'ks-','MarkerSize',kv.MarkerSize,...
'MarkerFaceColor','k');
errorbar((1:3),quart_pe_exp(2,:),...
quart_pe_exp(2,:) - quart_pe_exp(1,:),...
quart_pe_exp(3,:) - quart_pe_exp(2,:),...
'ko-','MarkerSize',kv.MarkerSize,...
'MarkerFaceColor','w');
plot([0,4],[pe0,pe0],'k:')
title(['e_{PE} = ' num2str(dpe,'%0.1f') '\circ ; r_{PE} = ' num2str(cc.pe.r,'%0.2f')],...
'FontSize',kv.FontSize)
ylabel('Local Polar RMS Error (deg)','FontSize',kv.FontSize)
set(gca,...
'XLim',[0.5 3.5],...
'XTick',1:3,...
'YLim',[27 52.9],...
'XTickLabel',{'BB';'LP';'W'},...
'YMinorTick','on','FontSize',kv.FontSize)
subplot(122)
errorbar((1:3)+dx,quart_qe_part(2,:),...
quart_qe_part(2,:) - quart_qe_part(1,:),...
quart_qe_part(3,:) - quart_qe_part(2,:),...
'ko-','MarkerSize',kv.MarkerSize,...
'MarkerFaceColor','k');
hold on
errorbar((1:3)-dx,quart_qe_pool(2,:),...
quart_qe_pool(2,:) - quart_qe_pool(1,:),...
quart_qe_pool(3,:) - quart_qe_pool(2,:),...
'ks-','MarkerSize',kv.MarkerSize,...
'MarkerFaceColor','k');
errorbar((1:3),quart_qe_exp(2,:),...
quart_qe_exp(2,:) - quart_qe_exp(1,:),...
quart_qe_exp(3,:) - quart_qe_exp(2,:),...
'ko-','MarkerSize',kv.MarkerSize,...
'MarkerFaceColor','w');
plot([0,4],[qe0 qe0],'k:')
title(['e_{QE} = ' num2str(dqe,'%0.1f') '% ; r_{QE} = ' num2str(cc.qe.r,'%0.2f')],...
'FontSize',kv.FontSize)
ylabel('Quadrant Error (%)','FontSize',kv.FontSize)
set(gca,...
'XLim',[0.5 3.5],...
'XTick',1:3,...
'YLim',[0.1 49],...
'XTickLabel',{'BB';'LP';'W'},...
'YAxisLocation','left',...
'YMinorTick','on','FontSize',kv.FontSize)
l = legend('Part.','Pool','Actual');
set(l,'Location','northwest','FontSize',kv.FontSize-1)
set(gcf,'PaperPosition',[1,1,10,3.5])
end
end
%% ------ FIG 9 -----------------------------------------------------------
if flags.do_fig9
% Model Settings
latdivision = 0; % lateral angle
dlat = 10;
% Experimental Settings
Conditions = {'CL','N24','N9'};
% Vocoder Settings
flow = 300; % lowest corner frequency
fhigh = 16000; % highest corner frequency
N = [inf,24,9];
%% Computations
s = data_baumgartner2014('pool');
s = s(ismember({s.id},'NH12'));
disp(['Listener: ' s.id])
chance = [];
for C = 1:length(Conditions)
Cond = Conditions{C};
%% Data
% Experimental data
data = data_goupell2010(Cond);
for ll = 1:length(s)
if sum(ismember({data.id},s(ll).id)) % if actual participant
s(ll).mm1=data(ismember({data.id},s(ll).id)).mtx;
for ii = 1:length(latdivision)
latresp = s(ll).mm1(:,7);
idlat = latresp <= latdivision(ii)+dlat & latresp > latdivision(ii)-dlat;
mm2 = s(ll).mm1(idlat,:);
chance = [chance;mm2];
s(ll).target{ii} = mm2(:,6); % polar angle of target
s(ll).response{ii} = mm2(:,8); % polar angle of response
end
end
end
% SP-DTFs
for ll = 1:length(s)
for ii = 1:length(latdivision)
s(ll).spdtfs{ii} = 0; % init
s(ll).polang{ii} = 0; % init
[s(ll).spdtfs{ii},s(ll).polang{ii}] = extractsp(latdivision(ii),s(ll).Obj);
end
end
%% Genereate conditional HRIRs
stimPar.SamplingRate = s(ll).fs;
imp = [1;zeros(2^12-1,1)]; % smooth results for 2^12
for ll = 1:length(s)
for ii = 1:length(latdivision)
if C==1
s(ll).spdtfs_c{ii} = s(ll).spdtfs{ii};
else
n = N(C);
[syncrnfreq, GETtrain] = GETVocoder('',imp,n,flow,fhigh,0,100,stimPar);
corners = [syncrnfreq(1);syncrnfreq(:,2)];
ref = s(ll).spdtfs{ii};
cond = zeros(length(imp),size(ref,2),2);
for ch = 1:size(ref,3)
for ang = 1:size(ref,2)
cond(:,ang,ch) = channelize('', 0.5*ref(:,ang,ch), ref(:,1), imp, n, corners, [], ...
GETtrain, stimPar, 1, 0.01*s(ll).fs, 0.01*s(ll).fs);
end
end
s(ll).spdtfs_c{ii} = cond;
end
end
end
%% Run Model
for ll = 1:length(s)
clear qe pe qe_t pe_t
for ii = 1:length(latdivision)
[p,rang] = baumgartner2014(...
s(ll).spdtfs_c{ii},s(ll).spdtfs{ii},s(ll).fs,...
'S',s(ll).S,'lat',latdivision(ii),...
'polsamp',s(ll).polang{ii});
[ qe(ii),pe(ii) ] = pmv2ppp(p , s(ll).polang{ii} , rang);
if sum(ismember({data.id},s(ll).id)) % if participant then actual targets
[ qe_t(ii),pe_t(ii) ] = pmv2ppp( ...
p , s(ll).polang{ii} , rang , s(ll).target{ii} );
end
end
% Model results of pool
s(ll).qe_pool(C,1) = mean(qe);
s(ll).pe_pool(C,1) = mean(pe);
if sum(ismember({data.id},s(ll).id)) % if actual participant
% Actual experimental results
s(ll).qe_exp(C,1) = localizationerror(s(ll).mm1,'querrMiddlebrooks');
s(ll).pe_exp(C,1) = localizationerror(s(ll).mm1,'rmsPmedianlocal');
s(ll).Nt(C,1) = size(s(ll).mm1,1);
% Model results of participants (actual target angles)
if length(latdivision) == 3
s(ll).qe_part(C,1) = (qe_t(1)*length(s(ll).target{1}) + ...
qe_t(2)*length(s(ll).target{2}) + ...
qe_t(3)*length(s(ll).target{3}))/...
(length(s(ll).target{1})+length(s(ll).target{2})+length(s(ll).target{3}));
s(ll).pe_part(C,1) = (pe_t(1)*length(s(ll).target{1}) + ...
pe_t(2)*length(s(ll).target{2}) + ...
pe_t(3)*length(s(ll).target{3}))/...
(length(s(ll).target{1})+length(s(ll).target{2})+length(s(ll).target{3}));
else
s(ll).qe_part(C,1) = mean(qe_t);
s(ll).pe_part(C,1) = mean(pe_t);
end
if flags.do_plot && latdivision(ii) == 0
if C==1; fp = figure; end
subplot(1,3,C)
plotbaumgartner2013(p,s(ll).polang{ii},rang,...
s(ll).target{ii},s(ll).response{ii},...
'MarkerSize',kv.MarkerSize,'cmax',0.05,'nocolorbar');
title({['A: PE = ' num2str(s(ll).pe_exp(C,1),2) '\circ, QE = ' num2str(s(ll).qe_exp(C,1),2) '%'];...
['P: PE = ' num2str(s(ll).pe_part(C,1),2) '\circ, QE = ' num2str(s(ll).qe_part(C,1),2) '%']},'FontSize',kv.FontSize-1)
text(90,240,Cond,...
'FontSize',kv.FontSize,'Color','w','HorizontalAlignment','center')
xlabel('Target Angle (deg)','FontSize',kv.FontSize)
ylabel('Response Angle (deg)','FontSize',kv.FontSize)
set(gca,'FontSize',kv.FontSize-1)
set(gca,'XTickLabel',{[];[];0;[];60;[];120;[];180;[];[]})
set(gca,'YTickLabel',{-60;[];0;[];60;[];120;[];180;[];240})
end
end
end
end
varargout{1} = s;
end
%% ------ FIG 10 ----------------------------------------------------------
if flags.do_fig10
fn = [mfilename('fullpath'),'_numchan.mat'];
if amtredofile(fn,flags.redomode)
autorefreshnotification(fn,flags)
% Model Settings
latdivision = 0; % lateral angle
dlat = 10;
% Experimental Settings
Conditions = {'CL','N24','N18','N12','N9','N6','N3'};
% Vocoder Settings
N = fliplr([3,6,9,12,18,24,30]); % # of vocoder channels
flow = 300; % lowest corner frequency
fhigh = 16000; % highest corner frequency
%% Computations
s = data_baumgartner2014('pool');
chance = [];
for C = 1:length(Conditions)
Cond = Conditions{C};
%% Data
% Experimental data
data = data_goupell2010(Cond);
for ll = 1:length(s)
if sum(ismember({data.id},s(ll).id)) % if actual participant
s(ll).mm1=data(ismember({data.id},s(ll).id)).mtx;
for ii = 1:length(latdivision)
latresp = s(ll).mm1(:,7);
idlat = latresp <= latdivision(ii)+dlat & latresp > latdivision(ii)-dlat;
mm2 = s(ll).mm1(idlat,:);
chance = [chance;mm2];
s(ll).target{ii} = mm2(:,6); % polar angle of target
s(ll).response{ii} = mm2(:,8); % polar angle of response
end
end
end
% SP-DTFs
for ll = 1:length(s)
for ii = 1:length(latdivision)
s(ll).spdtfs{ii} = 0; % init
s(ll).polang{ii} = 0; % init
[s(ll).spdtfs{ii},s(ll).polang{ii}] = extractsp(latdivision(ii),s(ll).Obj);
end
end
%% Genereate conditional HRIRs
stimPar.SamplingRate = s(ll).fs;
imp = [1;zeros(2^12-1,1)]; % smooth results for 2^12
for ll = 1:length(s)
for ii = 1:length(latdivision)
if C==1
s(ll).spdtfs_c{ii} = s(ll).spdtfs{ii};
else
n = N(C);
[syncrnfreq, GETtrain] = GETVocoder('',imp,n,flow,fhigh,0,100,stimPar);
corners = [syncrnfreq(1);syncrnfreq(:,2)];
ref = s(ll).spdtfs{ii};
cond = zeros(length(imp),size(ref,2),2);
for ch = 1:size(ref,3)
for ang = 1:size(ref,2)
cond(:,ang,ch) = channelize('', 0.5*ref(:,ang,ch), ref(:,1), imp, n, corners, [], ...
GETtrain, stimPar, 1, 0.01*s(ll).fs, 0.01*s(ll).fs);
end
end
s(ll).spdtfs_c{ii} = cond;
end
end
end
%% Run Model
for ll = 1:length(s)
clear qe pe qe_t pe_t
for ii = 1:length(latdivision)
[p,rang] = baumgartner2014(...
s(ll).spdtfs_c{ii},s(ll).spdtfs{ii},s(ll).fs,...
'S',s(ll).S,'lat',latdivision(ii),...
'polsamp',s(ll).polang{ii});
[ qe(ii),pe(ii) ] = pmv2ppp(p , s(ll).polang{ii} , rang);
if sum(ismember({data.id},s(ll).id)) % if actual participant actual targets
[ qe_t(ii),pe_t(ii) ] = pmv2ppp( ...
p , s(ll).polang{ii} , rang , s(ll).target{ii} );
end
end
% Model results of pool
s(ll).qe_pool(C,1) = mean(qe);
s(ll).pe_pool(C,1) = mean(pe);
if sum(ismember({data.id},s(ll).id)) % if actual participant
% Actual experimental results
s(ll).qe_exp(C,1) = localizationerror(s(ll).mm1,'querrMiddlebrooks');
s(ll).pe_exp(C,1) = localizationerror(s(ll).mm1,'rmsPmedianlocal');
s(ll).Nt(C,1) = size(s(ll).mm1,1);
% Model results of participants (actual target angles)
if length(latdivision) == 3
s(ll).qe_part(C,1) = (qe_t(1)*length(s(ll).target{1}) + ...
qe_t(2)*length(s(ll).target{2}) + ...
qe_t(3)*length(s(ll).target{3}))/...
(length(s(ll).target{1})+length(s(ll).target{2})+length(s(ll).target{3}));
s(ll).pe_part(C,1) = (pe_t(1)*length(s(ll).target{1}) + ...
pe_t(2)*length(s(ll).target{2}) + ...
pe_t(3)*length(s(ll).target{3}))/...
(length(s(ll).target{1})+length(s(ll).target{2})+length(s(ll).target{3}));
else
s(ll).qe_part(C,1) = mean(qe_t);
s(ll).pe_part(C,1) = mean(pe_t);
end
end
end
disp(['Condition ' Cond ' completed.'])
end
chance(:,8) = 240*rand(size(chance,1),1)-30;
pe_chance = localizationerror(chance,'rmsPmedianlocal');
qe_chance = localizationerror(chance,'querrMiddlebrooks');
[r,p] = corrcoef([s.qe_exp],[s.qe_part]);
cc.qe.r = r(2);
cc.qe.p = p(2);
fprintf('QE: r = %0.2f, p = %0.3f\n',r(2),p(2));
[r,p] = corrcoef([s.pe_exp],[s.pe_part]);
cc.pe.r = r(2);
cc.pe.p = p(2);
fprintf('PE: r = %0.2f, p = %0.3f\n',r(2),p(2));
s = rmfield(s,{'spdtfs','spdtfs_c','Obj','mm1'});
save(fn,'N', 'cc', 's', 'pe_chance', 'qe_chance',save_format);
else
load(fn);
end
varargout{1} = load(fn);
%% Measures
% Quartiles
quart_pe_part = fliplr(quantile([s.pe_part]',[.25 .50 .75]));
quart_qe_part = fliplr(quantile([s.qe_part]',[.25 .50 .75]));
quart_pe_pool = fliplr(quantile([s.pe_pool]',[.25 .50 .75]));
quart_qe_pool = fliplr(quantile([s.qe_pool]',[.25 .50 .75]));
quart_pe_exp = fliplr(quantile([s.pe_exp]',[.25 .50 .75]));
quart_qe_exp = fliplr(quantile([s.qe_exp]',[.25 .50 .75]));
% RMS Differences
% individual:
Ntargets = [s.Nt]'; % # of targets
relfreq = Ntargets/sum(Ntargets(:));
sd_pe = ([s.pe_part]'-[s.pe_exp]').^2; % squared differences
dpe = sqrt(relfreq(:)' * sd_pe(:)); % weighted RMS diff.
sd_qe = ([s.qe_part]'-[s.qe_exp]').^2;
dqe = sqrt(relfreq(:)' * sd_qe(:));
% Chance performance
qe0 = qe_chance;
pe0 = pe_chance;
if flags.do_plot
dx = 0.7;
figure
%% PE
subplot(121)
errorbar(fliplr(N)+dx,quart_pe_part(2,:),...
quart_pe_part(2,:) - quart_pe_part(1,:),...
quart_pe_part(3,:) - quart_pe_part(2,:),...
'ko-','MarkerSize',kv.MarkerSize,...
'MarkerFaceColor','k');
hold on
errorbar(fliplr(N)-dx,quart_pe_pool(2,:),...
quart_pe_pool(2,:) - quart_pe_pool(1,:),...
quart_pe_pool(3,:) - quart_pe_pool(2,:),...
'ks-','MarkerSize',kv.MarkerSize,...
'MarkerFaceColor','k');
errorbar(fliplr(N),quart_pe_exp(2,:),...
quart_pe_exp(2,:) - quart_pe_exp(1,:),...
quart_pe_exp(3,:) - quart_pe_exp(2,:),...
'ko-','MarkerSize',kv.MarkerSize,...
'MarkerFaceColor','w');
plot([0,2*max(N)],[pe0,pe0],'k:')
xlabel('Num. of Channels','FontSize',kv.FontSize)
ylabel('Local Polar RMS Error (deg)','FontSize',kv.FontSize)
title(['e_{PE} = ' num2str(dpe,'%0.1f') '\circ ; r_{PE} = ' num2str(cc.pe.r,'%0.2f')],...
'FontSize',kv.FontSize)
set(gca,'XLim',[1 32],'XTick',[3 6 9 12 18 24 30],...
'XTickLabel',{3;6;9;12;18;24;'CL'},...
'YLim',[29.1 54.5],...
'YMinorTick','on','FontSize',kv.FontSize)
l = legend('Part.','Pool','Actual');
set(l,'Location','southwest','FontSize',kv.FontSize-2)
%% QE
subplot(122)
plot([0,2*max(N)],[qe0,qe0],'k:')
hold on
errorbar(fliplr(N)+dx,quart_qe_part(2,:),...
quart_qe_part(2,:) - quart_qe_part(1,:),...
quart_qe_part(3,:) - quart_qe_part(2,:),...
'ko-','MarkerSize',kv.MarkerSize,...
'MarkerFaceColor','k');
errorbar(fliplr(N)-dx,quart_qe_pool(2,:),...
quart_qe_pool(2,:) - quart_qe_pool(1,:),...
quart_qe_pool(3,:) - quart_qe_pool(2,:),...
'ks-','MarkerSize',kv.MarkerSize,...
'MarkerFaceColor','k');
errorbar(fliplr(N),quart_qe_exp(2,:),...
quart_qe_exp(2,:) - quart_qe_exp(1,:),...
quart_qe_exp(3,:) - quart_qe_exp(2,:),...
'ko-','MarkerSize',kv.MarkerSize,...
'MarkerFaceColor','w');
title(['e_{QE} = ' num2str(dqe,'%0.1f') '% ; r_{QE} = ' num2str(cc.qe.r,'%0.2f')],...
'FontSize',kv.FontSize)
xlabel('Num. of Channels','FontSize',kv.FontSize)
ylabel('Quadrant Error (%)','FontSize',kv.FontSize)
set(gca,'XLim',[1 32],'XTick',[3 6 9 12 18 24 30],...
'XTickLabel',{3;6;9;12;18;24;'CL'},...
'YLim',[5.1 43],...
'YMinorTick','on',...
'YAxisLocation','left','FontSize',kv.FontSize)
set(gcf,'PaperPosition',[1,1,10,3.5])
end
end
%% ------ FIG 11 ----------------------------------------------------------
if flags.do_fig11
fn = [mfilename('fullpath'),'_nonindividual.mat'];
if amtredofile(fn,flags.redomode)
autorefreshnotification(fn,flags)
% Settings
latdivision = [-20,0,20]; % lateral center angles of SPs
flow = 4e3;
s = data_baumgartner2014('pool');
ns = length(s);
% DTFs of the SPs
for ll = 1:ns
for ii = 1:length(latdivision)
s(ll).latang{ii} = latdivision(ii);
s(ll).polangs{ii} = [];
s(ll).spdtfs{ii} = [];
[s(ll).spdtfs{ii},s(ll).polangs{ii}] = extractsp(...
s(ll).latang{ii},s(ll).Obj);
end
end
fprintf('\n Please wait a little! \n');
qe = zeros(ns,ns,length(latdivision)); % init QEs
pe = qe; % init PEs
pb = qe; % init Polar Biases
for ll = 1:ns % listener
for jj = 1:ns % ears
for ii = 1:length(latdivision) % SPs
s(ll).p{jj,ii} = [];
s(ll).respangs{ii} = [];
[s(ll).p{jj,ii},s(ll).respangs{ii}] = baumgartner2014(...
s(jj).spdtfs{ii},s(ll).spdtfs{ii},s(ll).fs,...
'S',s(ll).S,'lat',s(ll).latang{ii},...
'polsamp',s(ll).polangs{ii},'flow',flow);
[ qe(ll,jj,ii),pe(ll,jj,ii),pb(ll,jj,ii) ] = pmv2ppp( ...
s(ll).p{jj,ii} , s(jj).polangs{ii} , s(ll).respangs{ii});
end
end
fprintf(' Subject %2u of %2u \n',ll,ns);
end
lat_weight = cos(pi*latdivision/180); %lateral weight compensating compression of polar dimension
lat_weight = lat_weight/sum(lat_weight); % normalize
lat_weight = repmat(reshape(lat_weight,[1,1,length(latdivision)]),[ns,ns,1]);
qe_pool = sum(qe.*lat_weight,3);
pe_pool = sum(pe.*lat_weight,3);
pb_pool = sum(pb.*lat_weight,3);
save(fn,'qe_pool', 'pe_pool','pb_pool',save_format);
else
load(fn);
end
varargout{1} = load(fn);
data = data_middlebrooks1999;
%% Model outcomes
ns = size(pe_pool,1);
own = eye(ns) == 1;
other = not(own);
pb_pool = abs(pb_pool);
qe_own.quantiles = quantile(qe_pool(own),[0,0.05,0.25,0.5,0.75,0.95,1]);
pe_own.quantiles = quantile(pe_pool(own),[0,0.05,0.25,0.5,0.75,0.95,1]);
pb_own.quantiles = quantile(pb_pool(own),[0,0.05,0.25,0.5,0.75,0.95,1]);
qe_own.mean = mean(qe_pool(own));
pe_own.mean = mean(pe_pool(own));
pb_own.mean = mean(pb_pool(own));
qe_other.quantiles = quantile(qe_pool(other),[0,0.05,0.25,0.5,0.75,0.95,1]);
pe_other.quantiles = quantile(pe_pool(other),[0,0.05,0.25,0.5,0.75,0.95,1]);
pb_other.quantiles = quantile(pb_pool(other),[0,0.05,0.25,0.5,0.75,0.95,1]);
qe_other.mean = mean(qe_pool(other));
pe_other.mean = mean(pe_pool(other));
pb_other.mean = mean(pb_pool(other));
if flags.do_plot
dx = -0.2;
Marker = 'ks';
data.Marker = 'ko';
MFC = 'k'; % Marker Face Color
data.MFC = 'w';
fig = figure;
subplot(131)
middlebroxplot(1-dx,qe_own.quantiles,kv.MarkerSize)
plot(1-dx,qe_own.mean,Marker,'MarkerSize',kv.MarkerSize,'MarkerFaceColor',MFC)
middlebroxplot(1+dx,data.qe_own.quantiles,kv.MarkerSize)
plot(1+dx,data.qe_own.mean,data.Marker,'MarkerSize',kv.MarkerSize,'MarkerFaceColor',data.MFC)
middlebroxplot(2-dx,qe_other.quantiles,kv.MarkerSize)
plot(2-dx,qe_other.mean,Marker,'MarkerSize',kv.MarkerSize,'MarkerFaceColor',MFC)
middlebroxplot(2+dx,data.qe_other.quantiles,kv.MarkerSize)
plot(2+dx,data.qe_other.mean,data.Marker,'MarkerSize',kv.MarkerSize,'MarkerFaceColor',data.MFC)
ylabel('Quadrant Errors (%)','FontSize',kv.FontSize)
set(gca,'YLim',[-2 43],'XLim',[0.5 2.5],...
'XTick',1:2,'XTickLabel',{'Own' 'Other'},'FontSize',kv.FontSize)
subplot(132)
plot(1-dx,pe_own.mean,Marker,'MarkerSize',kv.MarkerSize,'MarkerFaceColor',MFC)
hold on
plot(1+dx,data.pe_own.mean,data.Marker,'MarkerSize',kv.MarkerSize,'MarkerFaceColor',data.MFC)
middlebroxplot(1-dx,pe_own.quantiles,kv.MarkerSize)
plot(1-dx,pe_own.mean,Marker,'MarkerSize',kv.MarkerSize,'MarkerFaceColor',MFC)
middlebroxplot(1+dx,data.pe_own.quantiles,kv.MarkerSize)
plot(1+dx,data.pe_own.mean,data.Marker,'MarkerSize',kv.MarkerSize,'MarkerFaceColor',data.MFC)
middlebroxplot(2-dx,pe_other.quantiles,kv.MarkerSize)
plot(2-dx,pe_other.mean,Marker,'MarkerSize',kv.MarkerSize,'MarkerFaceColor',MFC)
middlebroxplot(2+dx,data.pe_other.quantiles,kv.MarkerSize)
plot(2+dx,data.pe_other.mean,data.Marker,'MarkerSize',kv.MarkerSize,'MarkerFaceColor',data.MFC)
ylabel('Local Polar RMS Error (deg)','FontSize',kv.FontSize)
set(gca,'YLim',[-2 62],'XLim',[0.5 2.5],...
'XTick',1:2,'XTickLabel',{'Own' 'Other'},'FontSize',kv.FontSize)
subplot(133)
middlebroxplot(1-dx,pb_own.quantiles,kv.MarkerSize)
plot(1-dx,pb_own.mean,Marker,'MarkerSize',kv.MarkerSize,'MarkerFaceColor',MFC)
middlebroxplot(1+dx,data.pb_own.quantiles,kv.MarkerSize)
plot(1+dx,data.pb_own.mean,data.Marker,'MarkerSize',kv.MarkerSize,'MarkerFaceColor',data.MFC)
middlebroxplot(2-dx,pb_other.quantiles,kv.MarkerSize)
plot(2-dx,pb_other.mean,Marker,'MarkerSize',kv.MarkerSize,'MarkerFaceColor',MFC)
middlebroxplot(2+dx,data.pb_other.quantiles,kv.MarkerSize)
plot(2+dx,data.pb_other.mean,data.Marker,'MarkerSize',kv.MarkerSize,'MarkerFaceColor',data.MFC)
ylabel('Magnitude of Elevation Bias (deg)','FontSize',kv.FontSize)
set(gca,'YLim',[-2 55],'XLim',[0.5 2.5],...
'XTick',1:2,'XTickLabel',{'Own' 'Other'},'FontSize',kv.FontSize)
end
end
%% ------ FIG 12 ----------------------------------------------------------
if flags.do_fig12
fn = [mfilename('fullpath'),'_ripples.mat'];
if amtredofile(fn,flags.redomode)
autorefreshnotification(fn,flags)
do_exp1 = true;
do_exp2 = true;
plotpmv = false;
density = [0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 6, 8]; % ripples/oct
depth = 10:10:40; % ripple depth (peak-to-trough) in dB
%% Stimulus:
% 250-ms bursts, 20-ms raised-cosine fade in/out, flat from 0.6-16kHz
fs = 48e3; % sampling rate
flow = 1e3; % lower corner frequency of ripple modification in Hz
fhigh = 16e3; % upper corner frequency of ripple modification in Hz
Nf = 2^10; % # Frequency bins
f = 0:fs/2/Nf:fs/2; % frequency bins
id600 = find(f<=600,1,'last'); % index of 600 Hz (lower corner frequency of stimulus energy)
idlow = find(f<=flow,1,'last'); % index of flow (ripples)
idhigh = find(f>=fhigh,1,'first'); % index of fhigh (ripples)
N600low = idlow - id600 +1; % # bins without ripple modification
Nlowhigh = idhigh - idlow +1; % # bins with ripple modification %
O = log2(f(idlow:idhigh)/1e3); % freq. trafo. to achieve equal ripple density in log. freq. scale
% Raised-cosine "(i.e., cos^2)" ramp 1/8 octave wide
fup = f(idlow)*2^(1/8); % upper corner frequency of ramp upwards
idup = find(f<=fup,1,'last');
Nup = idup-idlow+1;
rampup = cos(-pi/2:pi/2/(Nup-1):0).^2;
fdown = f(idhigh)*2^(-1/8); % lower corner frequency of ramp downwards
iddown = find(f>=fdown,1,'first');
Ndown = idhigh-iddown+1;
rampdown = cos(0:pi/2/(Ndown-1):pi/2).^2;
ramp = [rampup ones(1,Nlowhigh-Nup-Ndown) rampdown];
ramp = [-inf*ones(1,id600-1) zeros(1,N600low) ramp -inf*ones(1,Nf - idhigh)];
% Ripples of Experiment I
Sexp1 = zeros(Nf+1,length(density),2); % 3rd dim: 1:0-phase 2:pi-phase
Sexp1(idlow:idhigh,:,1) = (40/2* sin(2*pi*density'*O+ 0))'; % depth: 40dB, 0-phase
Sexp1(idlow:idhigh,:,2) = (40/2* sin(2*pi*density'*O+pi))'; % depth: 40dB, pi-phase
Sexp1 = repmat(ramp',[1,length(density),2]) .* Sexp1;
Sexp1 = [Sexp1;Sexp1(Nf-1:-1:2,:,:)];
Sexp1(isnan(Sexp1)) = -100;
sexp1 = ifftreal(10.^(Sexp1/20),2*Nf);
sexp1 = circshift(sexp1,Nf); % IR corresponding to ripple modification
% Ripples of Experiment II
Sexp2 = zeros(Nf+1,length(depth),2); % 3rd dim: 1:0-phase 2:pi-phase
Sexp2(idlow:idhigh,:,1) = (depth(:)/2*sin(2*pi*1*O+ 0))'; % density: 1 ripple/oct, 0-phase
Sexp2(idlow:idhigh,:,2) = (depth(:)/2*sin(2*pi*1*O+pi))'; % density: 1 ripple/oct, pi-phase
Sexp2 = repmat(ramp',[1,length(depth),2]) .* Sexp2;
Sexp2 = [Sexp2;Sexp2(Nf-1:-1:2,:,:)];
Sexp2(isnan(Sexp2)) = -100;
sexp2 = ifftreal(10.^(Sexp2/20),2*Nf);
sexp2 = circshift(sexp2,Nf); % IR corresponding to ripple modification
%% Modeling
for do = 0:1
if do == 1
s = data_baumgartner2014('pool');
else % recalib
s = data_baumgartner2014('pool','recalib','do',0);
end
latseg = 0; % centers of lateral segments
runs = 5; % # runs of virtual experiments
pe_exp1 = zeros(length(latseg),length(s),length(density),2);
pe_exp2 = zeros(length(latseg),length(s),length(depth),2);
pe_flat = zeros(length(latseg),length(s));
for ss = 1:length(s)
for ll = 1:length(latseg)
[spdtfs,polang] = extractsp(latseg(ll),s(ss).Obj);
% target elevation range of +-60 deg
idt = find( polang<=60 | polang>=120 );
targets = spdtfs(:,idt,:);
tang = polang(idt);
[pflat,rang] = baumgartner2014(targets,spdtfs,...
'S',s(ss).S,'polsamp',polang,...
'lat',latseg(ll),'stim',[1;0],'do',do); % Impulse
mflat = baumgartner2014virtualexp(pflat,tang,rang,'runs',runs);
[f,r] = localizationerror(mflat,'sirpMacpherson2000');
pe_flat(ll,ss) = localizationerror(mflat,f,r,'perMacpherson2003');
if plotpmv; plotbaumgartner2013(pflat,tang,rang,mflat(:,6),mflat(:,8));title(num2str(pe_flat(ll,ss),2));pause(0.5); end
if do_exp1 % Exp. I
for ii = 1:2*length(density)
[p,rang] = baumgartner2014(targets,spdtfs,...
'S',s(ss).S,'polsamp',polang,...
'lat',latseg(ll),'stim',sexp1(:,ii),'do',do);
m = baumgartner2014virtualexp(p,tang,rang,'runs',runs);
pe_exp1(ll,ss,ii) = localizationerror(m,f,r,'perMacpherson2003');% - pe_flat(ll,ss);
if plotpmv; plotbaumgartner2013(p,tang,rang,m(:,6),m(:,8));title([num2str(density(mod(ii-1,10)+1)) 'ripples/oct; PE:' num2str(pe_exp1(ll,ss,ii),2) '%']);pause(0.5); end
end
end
if do_exp2 % Exp. II
for ii = 1:2*length(depth)
[p,rang] = baumgartner2014(targets,spdtfs,...
'S',s(ss).S,'polsamp',polang,...
'lat',latseg(ll),'stim',sexp2(:,ii),'do',do);
m = baumgartner2014virtualexp(p,tang,rang,'runs',runs);
pe_exp2(ll,ss,ii) = localizationerror(m,f,r,'perMacpherson2003');% - pe_flat(ll,ss);
if plotpmv; plotbaumgartner2013(p,tang,rang,m(:,6),m(:,8));title([num2str(depth(mod(ii-1,4)+1)) 'dB; PE:' num2str(pe_exp2(ll,ss,ii),2) '%']);pause(0.5); end
end
end
end
fprintf('\n %2.0f of %2.0f subjects completed',ss,length(s))
end
fprintf('\n')
if length(latseg) > 1
pe_exp1 = squeeze(mean(pe_exp1));
pe_exp2 = squeeze(mean(pe_exp2));
pe_flat = squeeze(mean(pe_flat));
else
pe_exp1 = squeeze(pe_exp1);
pe_exp2 = squeeze(pe_exp2);
pe_flat = squeeze(pe_flat);
end
%% Save
if do==0
noDCN.pe_exp1 = pe_exp1;
noDCN.pe_exp2 = pe_exp2;
noDCN.pe_flat = pe_flat;
delete(which('baumgartner2014calibration.mat'))
end
end
save(fn,'pe_exp1','pe_exp2','pe_flat','noDCN',save_format);
else
load(fn);
end
varargout{1} = load(fn);
dcn_flag = true;
% Original data:
data = data_macpherson2003;
%% Phase condition handling
pe_exp1 = mean(pe_exp1,3);
data.pe_exp1 = mean(data.pe_exp1,3);
pe_exp2 = mean(pe_exp2,3);
data.pe_exp2 = mean(data.pe_exp2,3);
if dcn_flag
noDCN.pe_exp1 = mean(noDCN.pe_exp1,3);
noDCN.pe_exp2 = mean(noDCN.pe_exp2,3);
end
idphase = 1;
%% Increase
pe_exp1 = pe_exp1 - repmat(pe_flat(:),1,size(pe_exp1,2));
pe_exp2 = pe_exp2 - repmat(pe_flat(:),1,size(pe_exp2,2));
if dcn_flag
noDCN.pe_exp1 = noDCN.pe_exp1 - repmat(noDCN.pe_flat(:),1,size(noDCN.pe_exp1,2));
noDCN.pe_exp2 = noDCN.pe_exp2 - repmat(noDCN.pe_flat(:),1,size(noDCN.pe_exp2,2));
end
%% Statistics
quart_pe_flat = quantile(pe_flat,[.25 .50 .75]);
quart_pe_data_flat = quantile(data.pe_flat,[.25 .50 .75]);
quart_pe_exp1 = quantile(pe_exp1,[.25 .50 .75]);
quart_pe_data_exp1 = quantile(data.pe_exp1,[.25 .50 .75]);
quart_pe_exp2 = quantile(pe_exp2,[.25 .50 .75]);
quart_pe_data_exp2 = quantile(data.pe_exp2,[.25 .50 .75]);
if dcn_flag
noDCN.quart_pe_flat = quantile(noDCN.pe_flat,[.25 .50 .75]);
noDCN.quart_pe_exp1 = quantile(noDCN.pe_exp1,[.25 .50 .75]);
noDCN.quart_pe_exp2 = quantile(noDCN.pe_exp2,[.25 .50 .75]);
end
if flags.do_plot
dx = 1.05;
FontSize = kv.FontSize;
MarkerSize = kv.MarkerSize;
% Exp1
fig = figure;
subplot(2,5,1:5)
errorbar(data.density/dx,quart_pe_exp1(2,:,idphase),...
quart_pe_exp1(2,:,idphase) - quart_pe_exp1(1,:,idphase),...
quart_pe_exp1(3,:,idphase) - quart_pe_exp1(2,:,idphase),...
'ks-','MarkerSize',MarkerSize,...
'MarkerFaceColor','k');
hold on
if dcn_flag
errorbar(data.density*dx,noDCN.quart_pe_exp1(2,:,idphase),...
noDCN.quart_pe_exp1(2,:,idphase) - noDCN.quart_pe_exp1(1,:,idphase),...
noDCN.quart_pe_exp1(3,:,idphase) - noDCN.quart_pe_exp1(2,:,idphase),...
'kd--','MarkerSize',MarkerSize-1,...
'MarkerFaceColor','k');
end
errorbar(data.density,quart_pe_data_exp1(2,:,idphase),...
quart_pe_data_exp1(2,:,idphase) - quart_pe_data_exp1(1,:,idphase),...
quart_pe_data_exp1(3,:,idphase) - quart_pe_data_exp1(2,:,idphase),...
'ko-','MarkerSize',MarkerSize,...
'MarkerFaceColor','w');
set(gca,'XScale','log','YMinorTick','on')
set(gca,'XLim',[0.25/1.2 8*1.2],'XTick',data.density,'YLim',[-15 59],'FontSize',FontSize)
xlabel('Ripple Density (ripples/octave)','FontSize',FontSize)
ylabel({'Increase in';'Polar Error Rate (%)'},'FontSize',FontSize)
if dcn_flag
leg = legend('Predicted with edge extraction','Predicted without edge extraction','Actual');
else
leg = legend('Predicted','Actual');
end
set(leg,'FontSize',FontSize-2,'Location','southwest')
%% Exp2
subplot(2,5,6:9)
errorbar(data.depth-1,quart_pe_exp2(2,:,idphase),...
quart_pe_exp2(2,:,idphase) - quart_pe_exp2(1,:,idphase),...
quart_pe_exp2(3,:,idphase) - quart_pe_exp2(2,:,idphase),...
'ks-','MarkerSize',MarkerSize,...
'MarkerFaceColor','k');
hold on
if dcn_flag
errorbar(data.depth+1,noDCN.quart_pe_exp2(2,:,idphase),...
noDCN.quart_pe_exp2(2,:,idphase) - noDCN.quart_pe_exp2(1,:,idphase),...
noDCN.quart_pe_exp2(3,:,idphase) - noDCN.quart_pe_exp2(2,:,idphase),...
'kd--','MarkerSize',MarkerSize-1,...
'MarkerFaceColor','k');
end
errorbar(data.depth,quart_pe_data_exp2(2,:,idphase),...
quart_pe_data_exp2(2,:,idphase) - quart_pe_data_exp2(1,:,idphase),...
quart_pe_data_exp2(3,:,idphase) - quart_pe_data_exp2(2,:,idphase),...
'ko-','MarkerSize',MarkerSize,...
'MarkerFaceColor','w');
set(gca,'XLim',[data.depth(1)-5 data.depth(end)+5],'XTick',data.depth,...
'YLim',[-15 59],'YMinorTick','on','FontSize',FontSize)
xlabel('Ripple Depth (dB)','FontSize',FontSize)
ylabel({'Increase in';'Polar Error Rate (%)'},'FontSize',FontSize)
ytick = get(gca,'YTick');
ticklength = get(gca,'TickLength');
%% Baseline
subplot(2,5,10)
errorbar(-0.5,quart_pe_flat(2),...
quart_pe_flat(2) - quart_pe_flat(1),...
quart_pe_flat(3) - quart_pe_flat(2),...
'ks-','MarkerSize',MarkerSize,...
'MarkerFaceColor','k');
hold on
if dcn_flag
errorbar(0.5,noDCN.quart_pe_flat(2),...
noDCN.quart_pe_flat(2) - noDCN.quart_pe_flat(1),...
noDCN.quart_pe_flat(3) - noDCN.quart_pe_flat(2),...
'kd-','MarkerSize',MarkerSize-1,...
'MarkerFaceColor','k');
end
errorbar(0,quart_pe_data_flat(2),...
quart_pe_data_flat(2) - quart_pe_data_flat(1),...
quart_pe_data_flat(3) - quart_pe_data_flat(2),...
'ko-','MarkerSize',MarkerSize,...
'MarkerFaceColor','w');
set(gca,'XLim',[-3 3],'XTick',0,'XTickLabel',{'Baseline'},...
'YLim',[-15 59],'YTick',ytick,'TickLength',3*ticklength,...
'FontSize',FontSize,'YAxisLocation','right')
xlabel(' ','FontSize',FontSize)
ylabel({'Polar Error Rate (%)'},'FontSize',FontSize)
%% Overall correlation between actual and predicted median values
if dcn_flag
m_pe_pred = [quart_pe_exp1(2,:,idphase) quart_pe_exp2(2,:,idphase)];
m_pe_pred_noDCN = [noDCN.quart_pe_exp1(2,:,idphase) noDCN.quart_pe_exp2(2,:,idphase)];
m_pe_actual = [quart_pe_data_exp1(2,:,idphase) quart_pe_data_exp2(2,:,idphase)];
r = corrcoef(m_pe_pred,m_pe_actual);
rDCN = r(2);
r = corrcoef(m_pe_pred_noDCN,m_pe_actual);
rnoDCN = r(2);
disp('Correlation between actual and predicted median values (15 conditions):')
disp(['w/ DCN: r = ' num2str(rDCN,'%0.2f')])
disp(['w/o DCN: r = ' num2str(rnoDCN,'%0.2f')])
end
end
end
%% ------ FIG 13 ----------------------------------------------------------
if flags.do_fig13
fn = [mfilename('fullpath'),'_highfreqatten.mat'];
if amtredofile(fn,flags.redomode)
fnHarvard = fullfile(amtbasepath,'signals','HarvardWords');
if not(exist(fnHarvard,'dir'))
disp('The Harvard word list is missing.')
disp('Please, contact Virginia Best (ginbest@bu.edu) or Craig Jin (craig.jin@sydney.edu.au) for providing their speech recordings.')
disp(['Then, move the folder labeled HarvardWords to: ' fullfile(amtbasepath,'signals') '.'])
return
end
autorefreshnotification(fn,flags)
%% Settings
latseg = 0;%[-20,0,20]; % centers of lateral segments
NsampModel = 50; % # of modeled speech samples (takes 30min/sample); max: 260
startSamp = 1;
saveflag = true;
plotpmv = false;
plotspec = false;
%% Loda Data
% Speech Samples from Harvard Word list
fs_orig = 80e3; % Hz
fs = 48e3; % Hz
p_resamp = fs/fs_orig;
kk = 1;
if NsampModel <= 51
Nsamp = NsampModel;
Nlists = 1;
else
Nsamp = 260;
Nlists = 5;
end
lsamp = 120000*p_resamp;
speechsample = cell(Nsamp,1);
for ii = 1:Nlists
tmp.path = fullfile(fnHarvard,['list' num2str(ii,'%1.0u')]);
tmp.dir = dir(fullfile(tmp.path,'*.mat'));
for jj = 1:length(tmp.dir)
if jj > Nsamp; break; end
load(fullfile(tmp.path,tmp.dir(jj).name))
signal = resample(word,p_resamp*10,10);
env = filter(normpdf(0:0.001:10,0,1),1,signal.^2);
idon = max(find(env > 5e7,1,'first')-1e3,1);
idoff = min(find(env > 5e7,1,'last')+1e3,lsamp);
lwin = idoff-idon+1;
speechsample{kk} = signal(idon:idoff) .* tukeywin(lwin,0.01)';
kk = kk + 1;
end
end
% FIR Low-pass filters at 8kHz
% Brick-wall (aka sinc-filter): fir1(200,1/3) -> -60 dB
fn_filters = 'exp_baumgartner2014_highfreqatten_filters.mat';
if not(exist(fn_filters,'file'))
disp(['Downloading ' fn_filters ' from http://www.kfs.oeaw.ac.at/']);
targetfn = fullfile(amtbasepath,'humandata',fn_filters);
sourcefn = ['http://www.kfs.oeaw.ac.at/research/experimental_audiology/projects/amt/' fn_filters];
urlwrite(sourcefn,targetfn);
end
load(fn_filters)
lp{1} = [1 zeros(1,100)];
lp{2} = fir20db;
lp{3} = fir40db;
lp{4} = fir60db;
%% Model Data
for do = 0:1
if do == 1
s = data_baumgartner2014('pool','recalib');
tempfn = fullfile(amtbasepath,'experiments','exp_baumgartner2014_highfreqatten'); % temporary folder
else % recalib
s = data_baumgartner2014('pool','recalib','do',0);
tempfn = fullfile(amtbasepath,'experiments','exp_baumgartner2014_highfreqatten_do0'); % temporary folder
end
mkdir(tempfn)
ape_BBnoise = zeros(1,length(s),length(latseg));
qe_BBnoise = ape_BBnoise;
for ss = 1:length(s)
for ll = 1:length(latseg)
[spdtfs,polang] = extractsp(latseg(ll),s(ss).Obj);
[p,rang] = baumgartner2014(spdtfs,spdtfs,'do',do,...
'S',s(ss).S,'polsamp',polang,'lat',latseg(ll),'notprint');
ape_BBnoise(1,ss,ll) = apebest2005(p,polang,rang);
qe_BBnoise(1,ss,ll) = pmv2ppp(p,polang,rang);
if plotpmv; figure; plotbaumgartner2013(p,polang,rang); title(num2str(ape_BBnoise(1,ss,ll),2)); end
end
end
%%
ape_all = zeros(length(lp),length(s),length(latseg));
qe_all = ape_all;
for kk = startSamp:NsampModel % start with 104
for ss = 1:length(s)
for ll = 1:length(latseg)
for ii = 1:length(lp)
stim = filter(lp{ii},1,speechsample{kk});
if plotspec; figure; audspecgram(stim(:),fs,'dynrange',150); end
[spdtfs,polang] = extractsp(latseg(ll),s(ss).Obj);
[p,rang] = baumgartner2014(spdtfs,spdtfs,'do',do,...
'S',s(ss).S,'polsamp',polang,...
'lat',latseg(ll),'stim',stim,'notprint');
ape_all(ii,ss,ll) = apebest2005(p,polang,rang);
qe_all(ii,ss,ll) = pmv2ppp(p,polang,rang);
if plotpmv; figure; plotbaumgartner2013(p,polang,rang); title(num2str(ape_all(ii,ss,ll),2)); end
end
end
end
% % Pool Lateral Segments
if length(latseg) > 1
ape_BBnoise = mean(ape_BBnoise,3);
ape_all = mean(ape_all,3);
qe_BBnoise = mean(qe_BBnoise,3);
qe_all = mean(qe_all,3);
end
if saveflag
savename = fullfile(tempfn,['result_best2005speech_samp' num2str(kk)]);
save(savename,'ape_all','qe_all','ape_BBnoise','qe_BBnoise')
end
fprintf('%1.0u of %2.0u samples completed\n',kk,NsampModel)
end
results = dir(fullfile(tempfn,'result_best2005speech_samp*.mat'));
tmp = load(fullfile(tempfn,results(1).name));
ape_BBnoise = tmp.ape_BBnoise;
qe_BBnoise = tmp.qe_BBnoise;
ape_all = zeros([size(tmp.ape_all) length(results)]);
qe_all = ape_all;
for ii = 1:length(results)
tmp = load(fullfile(tempfn,results(ii).name));
ape_all(:,:,ii) = tmp.ape_all;
qe_all(:,:,ii) = tmp.qe_all;
end
if do == 0
save([fn(1:end-4) '_do0.mat'],'ape_all','qe_all','ape_BBnoise','qe_BBnoise',save_format);
else
save(fn,'ape_all','qe_all','ape_BBnoise','qe_BBnoise',save_format);
end
% rmdir(tempfn,'s');
end
noDCN = load([fn(1:end-4) '_do0.mat']);
else
load(fn);
noDCN = load([fn(1:end-4) '_do0.mat']);
end
varargout{1} = load(fn);
varargout{2} = load([fn(1:end-4) '_do0.mat']);
data = data_best2005;
% Pool Samples
ape_pooled = mean(ape_all,3);
qe_pooled = mean(qe_all,3);
noDCN.ape_pooled = mean(noDCN.ape_all,3);
noDCN.qe_pooled = mean(noDCN.qe_all,3);
% Confidence Intervals or standard errors
df_speech = size(ape_all,2)-1;%*size(ape_all,3)-1;
tquant_speech = 1;%icdf('t',.975,df_speech);
seape_speech = std(ape_pooled,0,2)*tquant_speech/(df_speech+1);
df_noise = size(ape_BBnoise,2)-1;
tquant_noise = 1;%icdf('t',.975,df_noise);
seape_noise = std(ape_BBnoise,0,2)*tquant_noise/(df_noise+1);
seape = [seape_noise;seape_speech];
% DCN
df_speech = size(noDCN.ape_all,2)-1;%*size(ape_all,3)-1;
tquant_speech = 1;%icdf('t',.975,df_speech);
seape_speech = std(noDCN.ape_pooled,0,2)*tquant_speech/(df_speech+1);
df_noise = size(noDCN.ape_BBnoise,2)-1;
tquant_noise = 1;%icdf('t',.975,df_noise);
seape_noise = std(noDCN.ape_BBnoise,0,2)*tquant_noise/(df_noise+1);
noDCN.seape = [seape_noise;seape_speech];
% Means
ape = mean([ape_BBnoise ; ape_pooled],2);
qe = mean([qe_BBnoise ; qe_pooled],2);
noDCN.ape = mean([noDCN.ape_BBnoise ; noDCN.ape_pooled],2);
noDCN.qe = mean([noDCN.qe_BBnoise ; noDCN.qe_pooled],2);
if flags.do_plot
dx = 0;
MarkerSize = kv.MarkerSize;
FontSize = kv.FontSize;
xticks = 0:size(ape_all,1);
fig = figure;
subplot(211)
h(1) = errorbar(xticks-dx,ape,seape,'ko');
set(h(1),'MarkerFaceColor','k','MarkerSize',MarkerSize,'LineStyle','-')
hold on
h(3) = errorbar(xticks+dx,noDCN.ape,noDCN.seape,'kd');
set(h(3),'MarkerFaceColor','k','MarkerSize',MarkerSize-1,'LineStyle','--')
h(2) = errorbar(xticks,data.ape,data.seape,'ko');
set(h(2),'MarkerFaceColor','w','MarkerSize',MarkerSize,'LineStyle','-')
% ylabel('| \theta - \vartheta | (deg)','FontSize',FontSize)
ylabel('Polar Error (deg)','FontSize',FontSize)
set(gca,'XTick',xticks,'XTickLabel',[],'FontSize',FontSize)
set(gca,'XLim',[-0.5 4.5],'YLim',[12 95],'YMinorTick','on')
pos = get(gca,'Position');
pos(2) = pos(2)-0.11;
set(gca,'Position',pos)
leg = legend('Predicted with edge extraction','Predicted without edge extraction','Actual');
set(leg,'FontSize',FontSize-2,'Location','northoutside')
pos = get(leg,'Position');
pos(2) = pos(2)+0.14;
set(leg,'Position',pos)
subplot(212)
h(1) = plot(xticks-dx,qe,'ko');
set(h(1),'MarkerFaceColor','k','MarkerSize',MarkerSize,'LineStyle','-')
hold on
h(3) = plot(xticks+dx,noDCN.qe,'kd');
set(h(3),'MarkerFaceColor','k','MarkerSize',MarkerSize-1,'LineStyle','--')
h(2) = plot(xticks([1 2 5]),data.qe([1 2 5]),'ko');
set(h(2),'MarkerFaceColor','w','MarkerSize',MarkerSize,'LineStyle','-')
% h(4) = plot(xticks(5),data.qe(5),'ko');
% set(h(4),'MarkerFaceColor','w','MarkerSize',MarkerSize)
% ylabel('QE (%)','FontSize',FontSize)
ylabel('Quadrant Err. (%)','FontSize',FontSize)
set(gca,'XTick',xticks,'XTickLabel',data.meta,'FontSize',FontSize,...
'XLim',[-0.5 4.5],'YLim',[-3 53],'YMinorTick','on')
end
end
end
%% ------------------------------------------------------------------------
% ---- INTERNAL FUNCTIONS ------------------------------------------------
% ------------------------------------------------------------------------
function autorefreshnotification(fn,flags)
if flags.do_autorefresh
disp(['Calculation of ' fn ' started.'])
disp('Results can be also downloaded here:')
disp(' http://www.kfs.oeaw.ac.at/research/experimental_audiology/projects/amt/exp_baumgartner2014.zip')
disp('Unzip the folder and move the single files into:')
disp([' ' fullfile(amtbasepath,'experiments')])
end
end
function hM_warped = warp_hrtf(hM,fs)
% warps HRTFs acc. to Walder (2010)
% Usage: hM_warped = warp_hrtf(hM,fs)
N = fs;
fu = 2800;
fowarped = 8500;
fo = 16000;
fscala = [0:fs/N:fs-fs/N]';
hM_warped = zeros(512,size(hM,2),size(hM,3));
fuindex = max(find(fscala <= fu)); % 2800
fowindex = min(find(fscala >= fowarped));
foindex = min(find(fscala >= fo));
for canal = 1:size(hM,3)
for el = 1:size(hM,2)
yi = ones(fs/2+1,1)*(10^-(70/20));
flin1 = [fscala(1:fuindex-1)];
flin2 = [linspace(fscala(fuindex),fscala(foindex),fowindex-fuindex+1)]';
fscalawarped = [flin1 ; flin2];
% interpolate
x = fscala(1:foindex);
H = fft(hM(:,el,canal),N);
Y = H(1:foindex);
xi = fscalawarped;
yi(1:length(xi),1) = interp1(x, Y, xi,'linear');
yges=([yi; conj(flipud(yi(2:end-1)))]);
hges = ifft([yges(1:end)],length(yges));
hges=fftshift(ifft(yges));
hwin=hges(fs/2-256:fs/2+768);
hwinfade = FW_fade(hwin,512,24,96,192);
hM_warped(1:end,el,canal)=hwinfade;
end
end
end
function [syncrnfreq, GETtrain] = GETVocoder(filename,in,channum,lower,upper,alpha,GaussRate,stimpar)
warning('off')
% channel/timing parameters
srate=stimpar.SamplingRate;
nsamples=length(in); % length of sound record
duration=nsamples/srate; % duration of the signal (in s)
t=0:1/srate:duration;
t=t(1:nsamples);
extendedrange = 0;
if alpha == -1 % Log12ER case
extendedrange = 1;
alpha = 0.28;
elseif alpha == 0 % use predefined alphas
switch channum
case 3
alpha=1.42;
case 6
alpha=0.67;
case 9
alpha=0.45;
case 12
alpha=0.33;
case 18
alpha=0.22;
case 24
alpha=0.17;
otherwise
error(['Alpha not predefined for channels number of ' num2str(channu)]);
end
end
% Synthesis: These are the crossover frequencies that the output signal is mapped to
crossoverfreqs = logspace( log10(lower), log10(upper), channum + 1);
if extendedrange == 1
crossoverfreqs = [300,396,524,692,915,1209,1597,2110,2788,4200,6400,10000,16000];
end
syncrnfreq(:,1)=crossoverfreqs(1:end-1);
syncrnfreq(:,2)=crossoverfreqs(2:end);
for i=1:channum
cf(i) = sqrt( syncrnfreq(i,1)*syncrnfreq(i,2) );
end
% Pulse train parameters
Gamma = alpha*cf;
if extendedrange == 1
Gamma(9) = 1412;
Gamma(10) = 2200;
Gamma(11) = 3600;
Gamma(12) = 6000;
end
N = duration*GaussRate; % number of pulses
Genv=zeros(N,nsamples);
GETtrain=zeros(channum,nsamples);
% Make pulse trains
for i = 1:channum
Teff = 1000/Gamma(i);
if Teff > 3.75
% if modulation depth is not 100%, make pulse train then modulate
for n = 1:N
% delay pulses by half a period so first Gaussian pulse doesn't
% start at a max
T = (n-0.5)/N*duration;
Genv(n,:) = sqrt(Gamma(i)) * exp(-pi*(Gamma(i)*(t-T)).^2);
end
Genv_train(i,:) = sum(Genv);
%modulate carrier
GETtrain(i,:) = Genv_train(i,:) .* sin(2*pi*cf(i)*t);
%normalize energy
Energy(i) = norm(GETtrain(i,:))/sqrt(length(t));
% Energy(i) = rms(GETtrain(i,:)); % !!!!!!!!!!!!
GETtrain(i,:) = GETtrain(i,:)/Energy(i);
else
% if modulation depth is 100%, make modulated pulses and replicate
T=(0.5)/N*duration;
Genv=zeros(N,nsamples);
Genv(1,:) = sqrt(Gamma(i)) * exp(-pi*(Gamma(i)*(t-T)).^2) .* sin(2*pi*cf(i)*t - T + pi/4); %!!! (t-T)
Genv=repmat(Genv(1,:),[N 1]);
for n=1:N
T = round((n)/N*nsamples);
Genv(n,:)=circshift(Genv(n,:),[1 T-1]);
end
GETtrain(i,:) = sum(Genv);
%normalize energy
Energy(i) = norm(GETtrain(i,:))/sqrt(length(t));
% Energy(i) = rms(GETtrain(i,:)); % !!!!!!!!!!!!
GETtrain(i,:) = GETtrain(i,:)/Energy(i);
end
end
end
function out=channelize(fwavout, h, h0, in, channum, corners, syncrnfreq, ...
GETtrain, stimpar, amp, fadein, fadeout)
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% *** v1.2.0 %
% GET Vocoder scaled by energy, not envelope %
% %
% *** v1.1.0 %
% Added Gaussian Envelope Tone (GET) Vocoder %
% GET pulse train is generated and passed to this function %
% M. Goupell, May 2008 %
% %
% *** v1.0.0 %
% Modified from ElecRang/matlab/makewav.m v1.3.1 %
% To be used with Loca by M. Goupell, Nov 2007 %
% Now program receives a sound rather than reading a speech file %
% Rewrote according to the specifications (PM, Jan. 2008) %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% h = hrtf
% h0 = hrtf for reference position
% in = reference noise
% noise = number of channels of noise vectors
srate=stimpar.SamplingRate;
N=length(in); % length of sound record
d=0.5*srate; % frequency scalar
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Read corner frequencies for channels %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Synthesis: These are the crossover frequencies that the output signal is mapped to
% calculated now in GETVocoder, passed to this function
% Analysis: These are the crossover frequencies that the input signal is subdivided by
if length(corners)<=channum
error('You need at least one more corner frequency than number of channels');
end
anacrnfreq(:,1)=corners(1:end-1);
anacrnfreq(:,2)=corners(2:end);
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Analysis: Filter Signal
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
inX=fftfilt(h,in);
order=4; %order of butterworth filter
% out=zeros(1,N);
% filtX=zeros(channum,N);
for i=1:channum
[b, a]=butter(order, anacrnfreq(i,:)/d);
out=filter(b, a, inX); % bandpass-filtering
% E(i)=norm(out,1)/sqrt(N);
E(i) = rms(out);
end
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Synthesis %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% each channel
for i=1:channum
outX(i,:) = GETtrain(i,:) * E(i);
end
% sum me up scotty
out=sum(outX,1);
% for i = 1:channum
% subplot(channum/3,3,i)
% plot(outX(i,(1:480)))
% end
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Save file %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
out=out*(10^(amp/20))/sqrt(sum(out.^2))*sqrt(sum(in.^2))*sqrt(sum(h.^2))/sqrt(sum(h0.^2));
% disp(20*log10(sqrt(sum(out.^2))));
ii=max(max(abs(out)));
if ii>=1
error(['Maximum amplitude value is ' num2str(20*log10(ii)) 'dB. Set the HRTF scaling factor lower to avoid clipping']);
end
out=FW_fade(out,0,fadein,fadeout);
% wavwrite(out,srate,stimpar.Resolution,fwavout);
end
function out = FW_fade(inp, len, fadein, fadeout, offset)
% FW_FADE crop/extend and fade in/out a vector.
%
% OUT = FW_FADE(INP, LEN, FADEIN, FADEOUT, OFFSET) crops or extends with zeros the signal INP
% up to length LEN. Additionally, the result is faded in/out using HANN window with
% the length FADEIN/FADEOUT, respectively. If given, an offset can be added to show
% where the real signal begins.
%
% When used to crop signal, INP is cropped first, then faded out.
% When used to extend signal, INP is faded out first, then extended too provide fading.
%
% INP: vector with signal (1xN or Nx1)
% LEN: length of signal OUT (without OFFSET)
% FADEIN: number of samples to fade in, beginning from OFFSET
% FADEOUT: number of samples to fade out, ending at the end of OUT (without OFFSET)
% OFFSET: number of offset samples before FADEIN, optional
% OUT: cropped/extended and faded vector
%
% Setting a parameter to 0 disables corresponding functionality.
% ExpSuite - software framework for applications to perform experiments (related but not limited to psychoacoustics).
% Copyright (C) 2003-2010 Acoustics Research Institute - Austrian Academy of Sciences; Piotr Majdak and Michael Mihocic
% Licensed under the EUPL, Version 1.1 or ? as soon they will be approved by the European Commission - subsequent versions of the EUPL (the "Licence")
% You may not use this work except in compliance with the Licence.
% You may obtain a copy of the Licence at: http://ec.europa.eu/idabc/eupl
% Unless required by applicable law or agreed to in writing, software distributed under the Licence is distributed on an "AS IS" basis, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
% See the Licence for the specific language governing permissions and limitations under the Licence.
% 7.11.2003
% 22.08.2005: improvement: INP may be 1xN or Nx1 now.
% Piotr Majdak (piotr@majdak.com)
ss=length(inp); % get length of inp
% offset
if ~exist('offset','var')
offset = 0;
end
offset=round(offset);
len=round(len);
fadein=round(fadein);
fadeout=round(fadeout);
if offset>ss
error('OFFSET is greater than signal length');
end
% create new input signal discarding offset
inp2=inp(1+offset:end);
ss=length(inp2);
% fade in
if fadein ~= 0
if fadein > ss
error('FADEIN is greater than signal length');
end
han=hanning(fadein*2);
if size(inp2,1)==1
han=han';
end
inp2(1:fadein) = inp2(1:fadein).*han(1:fadein);
end
% fade out window
if len == 0
len = ss;
end
if len <= ss
% crop and fade out
out=inp2(1:len);
% fade out
if fadeout ~= 0
if fadeout > len
error('FADEOUT is greater than cropped signal length');
end
han = hanning(2*fadeout);
if size(out,1)==1
han=han';
end
out(len-fadeout+1:end)=out(len-fadeout+1:end).*han(fadeout+1:end);
end
else
% fade out and extend
if fadeout ~= 0
if fadeout > ss
error('FADEOUT is greater than signal length');
end
han = hanning(2*fadeout);
inp2(ss-fadeout+1:end)=inp2(ss-fadeout+1:end).*han(fadeout+1:end);
end
out = [zeros(offset,1); inp2; zeros(len-ss,1)];
end
end
function middlebroxplot(x,quantiles,MarkerSize)
lilen = 0.14; % length of horizontal lines
% Symbols
plot(x,quantiles(1),'kx','MarkerSize',MarkerSize) % min
hold on
plot(x,quantiles(7),'kx','MarkerSize',MarkerSize) % max
% Horizontal lines
line(x+0.5*[-lilen,lilen],repmat(quantiles(2),2),'Color','k') % lower whisker
line(x+[-lilen,lilen],repmat(quantiles(3),2),'Color','k') % 25% Quartile
line(x+[-lilen,lilen],repmat(quantiles(4),2),'Color','k') % Median
line(x+[-lilen,lilen],repmat(quantiles(5),2),'Color','k') % 75% Quartile
line(x+0.5*[-lilen,lilen],repmat(quantiles(6),2),'Color','k') % upper whisker
% Vertical lines
line([x,x],quantiles(2:3),'Color','k') % connector lower whisker
line([x,x],quantiles(5:6),'Color','k') % connector upper whisker
line([x,x]-lilen,quantiles([3,5]),'Color','k') % left box edge
line([x,x]+lilen,quantiles([3,5]),'Color','k') % left box edge
end
function ape = apebest2005(p,tang,rang)
%APEBEST2005 PMV to PPP conversion
% Usage: [ ape ] = apebest2005( p,tang,rang );
%
% Input parameters:
% p : prediction matrix (response PMVs)
% tang : possible polar target angles. As default, ARI's MSP
% polar angles in the median SP is used.
% rang : polar angles of possible response angles.
% As default regular 5deg-sampling is used (-30:5:210).
%
% Output parameter:
% ape : absolute polar angle error in degrees
%
% AUTHOR : Robert Baumgartner
nt = length(tang);
apet = zeros(nt,1);
for ii = 1:nt % for all target positions
d = tang(ii)-rang; % wraped angular distance between tang & rang
iduw = (d < -180) | (180 < d); % 180-deg unwrap indices
d(iduw) = mod(d(iduw) + 180,360) - 180; % 180-deg unwrap
d = abs(d); % absolut distance
apet(ii) = sum( p(:,ii) .* d'); % absolut polar angle error for target ii
end
ape = mean(apet);
end
Build with Bootstrap