JELFS2011
Binaural speech advantage

Usage:

[benefit weighted_SNR weighted_bmld] = jelfs2011(target,interferer)

Input parameters:

`target`	Binaural target impulse response (or stimulus)
`interfererer`	Binaural interferer impulse response (or stimulus) Multiple interfering impulse responses MUST be concatenated, not added.

Output parameters:

`benefit`	spatial release from masking (SRM)in dB
`weighted_SNR`	component of SRM due to better-ear listening (dB)
`weighted_bmld`	component of SRM due to binaural unmasking (dB)

Description:

jelfs2011(target,interferer,fs) computes the increase in speech intelligibility of the target when the target and interferer are spatially separated. They are preferably represented by their impulse responses, but can be represented by noise recordings of equivalent spectral shape emitted from the same source locations (using the same noise duration for target and interferer). The impulse responses are assumed to be sampled at a sampling frequency of fs Hz. If the modelled sources differ in spectral shape, this can be simulated by pre-filtering the impulse responses.

jelfs2011 accepts the following flags:

`'filterbank'`	processing via AMT's `ufilterbankz` function (default)
`'single'`	processing via the gammatone filter provided and used in `exp_lavandier2022`

[benefit, weighted_SNR, weighted_bmld]=jelfs2011(...) additionally returns the benefit from the SII weighted SNR and the SII weighted BMLD.

If target or interferer are cell-arrays, the HRTF data will be loaded. The first argument in the cell-array is the azimuth angle, and the second parameter is the database type. The elevation is set to zero. function.

Example:

The following code will load HRIRs from the 'kemar' database and compute the binaural speech intelligibility advantage for a target at 0 degrees and interferers at 300 and 90 degrees:

jelfs2011({0,'kemar'},{[330 90],'kemar'})

This code produces the following output::

Downloading /jelfs2011/kemar.sofa from http://amtoolbox.org/amt-1.3.0/hrtf

ans =

    1.0773

References:

M. Lavandier, T. Vicente, and L. Prud'homme. A series of snr-based speech intelligibility models in the auditory modeling toolbox. Acta Acustica, 2022.

J. Culling, S. Jelfs, and M. Lavandier. Mapping Speech Intelligibility in Noisy Rooms. In Proceedings of the 128th convention of the Audio Engineering Society, Convention paper 8050, 2010.

S. Jelfs, J. Culling, and M. Lavandier. Revision and validation of a binaural model for speech intelligibility in noise. Hearing Research, 2011.

M. Lavandier, S. Jelfs, J. Culling, A. Watkins, A. Raimond, and S. Makin. Binaural prediction of speech intelligibility in reverberant rooms with multiple noise sources. The Journal of the Acoustical Society of America, 131(1):218--231, 2012.

THE AUDITORY MODELING TOOLBOX